View 10-69518-11S_7169943.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

amphenol qwl series cylindrical connectors 12-053-4 am p henol ?
1 description page amphenol ? heavy duty cylindrical connectors qwl series ......................................................... 2 qwl the environmental connector ............................... 3 qwl how to order ..................................................... 4, 5 qwl 10-1070 wall mount receptacle ............................ 6 qwl 10-1071 cable connecting plug ............................ 7 qwl 10-1072 box mount receptacle ............................ 8 qwl 10-1073 jam nut receptacle (wall mount) ............. 9 qwl 10-1074 thru bulkhead receptacle ..................... 10 qwl 10-1076 straight plug ......................................... 11 qwl 10-1077 flange mount plug ................................ 12 qwl 10-1079 jam nut receptacle (box mount) ........... 13 qwl insert arrangements selection guide .............................................. 14-16 qwl alternate positioning ........................................... 17 qwl contact insert arrangements ......................... 18-29 qwl special contact insert arrangements ............. 30-40 qwl - accessories cabling information ...................................... 41, 42 description............................................................... page qwl - accessories 10-130380 cable sealing adapter (with clamp bars) .......................................... 43, 44 qwl - accessories 10-10133x cable sealing adapters ................ 45-48 qwl - accessories 10-113637 cable sealing adapter (with woven strain relief) ....................................................49-52 qwl - accessories adapter, cable clamp .......................................... 53 qwl - accessories adapter, cable clamp, sealing plugs .............. 54-56 qwl - accessories protection caps ............................................. 57, 58 qwl - accessories flange gasket, grip banding clamp ...................... 59 qwl crimp contacts .................................................... 60 qwl solder contacts ................................................... 61 qwl application tools (crimp type) ...............................62 qwl thermocouple contacts and arrangements ......................................... 63-69 other heavy duty connectors offered by amphenol .............................................................70 sales office listing table of contents for additional information concerning the amphenol ? qwl series cylindrical connector, or if there are special application requirements, contact your local sales office or amphenol corporation amphenol aerospace 40-60 delaware ave. sidney, new york 13838-1395 telephone: 607-563-5011 fax: 607-563-5351 www.amphenol-aerospace.com (most amphenol catalogs can be viewed, printed and down-loaded from the website) amphenol aerospace operates quality systems that are certified to iso-9001 and as-9100 by third party registrars.
2 amphenol heavy duty cylindrical connectors qwl series wall mount receptacle thru bulkhead receptacle straight plug cable connecting plug box mount receptacle flange mount plug jam nut receptacle jam nut receptacle (wall mount) (box mount) amphenol ? qwl series connec- tors are tailor made for compact, heavy duty industrial use. the outstanding performance of this series makes it well suited for ship- board installations and ground sup- port power distribution applications where physical strength and depend- ability are key requirements. the qwl series are a versatile, economical alternative to military qualified designs. equivalent ms shell sizes and insert arrangements offer compatibility with all standard cable types. mil-c-22992 environmental connector require- ments (see page 1) are used as a per- formance criteria base for this series to assure reliability under the most severe conditions. the design features of this connec- tor series provide: ? exceptional service - high strength aluminum shells with alu- milite 225* hard anodic finish and shock resistant resilient inserts. ? foolproof operation - rugged double stub coupling threads, left hand accessory threads and sim- ple single keyway mating. ? versatility - both ms and custom insert patterns available for a wide variety of multiconductor cables. a complete line of accessories is available for use with qwl series connectors, including cable sealing and clamp adapters, protective cov- ers, flange gaskets and banding clamps. * registered trademark of aluminum company of america ?
3 qwl the environmental connector ? high current capacity for power distribution network and inputs to large equipment ? rugged construction dictated by the working environment, high strength aluminum shells with alumilite 225* hard anodic finish, shock resis- tant resilient inserts, gaskets or o rings at appropriate surfaces for perfect weather tight connections. ? serviceability and fool-proof operation with fast coupling, easily maintained double stub threads, left hand accessory threads and single keyway mating. ? versatility - both ms and custom insert patterns available to accommo- date a wide variety of multi conductor cables. condition configuration description reference thermal shock unmated five complete one hour temperature cycles of C55c to +125c mil-std-1344 method 1003 test condition moisture resistance (cable mounted connectors) mated ten complete 24 hour cycles of +25c to +65c temperature at 90% to 98% humidity mil-std-202 method 106 durability mated 500 complete mating/unmating cycles mil-c-22992 salt spray (corrosion) unmated 48 hour exposure to atomized 5% saline solution at +35c mil-std-1344 method 1001 vibration mated 10 to 55 hz, .06 inch total excursion in 1 minute cycles for 6 hours 55 to 2000 hz, 10g peak amplitude sweep mil-std-1344 method 2005 high impact mated nine hammer blows from 1, 3 and 5 feet, three each in three axes on mounting panel mil-std-202 method 207 fluid immersion unmated 20 hours immersion in hydraulic fluid and lubricating oil mil-c-22992 water immersion mated 4 hours immersion at 1 atmosphere pressure differential mil-c-22992 * registered trademark of aluminum company of america ? high current capacity for power distribution network and inputs to large equipment ? rugged construction dictated by the working environment, high strength aluminum shells with alumilite 225* hard anodic finish, shock resis- tant resilient inserts, gaskets or o rings at appropriate surfaces for perfect weather tight connections. ? serviceability and fool-proof operation with fast coupling, easily maintained double stub threads, left hand accessory threads and single keyway mating. ? versatility - both ms and custom insert patterns available to accommo- date a wide variety of multi conductor cables.
4 qwl how to order qwl heavy duty cylindrical connectors are ordered by amphenol ? part number only. to illustrate the ordering procedure, part number 10-107628-5p is shown as follows: part number 10 -107 6 28-5 p 12345 see code below: 1. base number prefix - used to define contact type and finish. 10- solder type contacts, silver plated (standard) 75- crimp type contacts, silver plated 81- crimp type contacts, plated .0001 gold over silver 82- crimp type contacts for mil-c-13777 cable, silver plated 83- crimp type contacts for mil-c-13777 cable, plated .0001 gold over silver 85- crimp type contacts plated .00005 gold over silver 2. base number - qwl series heavy duty cylindrical connector. 3. shell style - 0 designates wall mount receptacle 1 designates cable connecting plug 2 designates box mount receptacle 3 designates jam nut receptacle with rear accessory threads (wall mount) 4 designates thru bulkhead receptacle 6 designates straight plug 7 designates flange mount plug 9 designates jam nut receptacle (box mount) 4. shell size/insert arrangement - amphenol ? qwl connectors are available in equivalent ms shell sizes with all current ms insert arrangements as well as a large selection of special arrangements for power and signal circuits. select the required insert arrangement number from those shown on pages 18-40. 5. contact type/alternate insert rotations - p for pin, s for socket. when an alternate position of the connector insert is required to prevent cross mating of connectors, a different letter (other than p or s) is used. select from the table below the amphenol ? letter which indicates both type of contact, and insert rotation desired. refer to page 17 for alternate insert rotations. pin contacts socket contacts ms letters amphenol ? letter ms letters amphenol ? letter p pw px py pz p (normal) g i k m s sw sx sy sz s (normal) h j l n
5 qwl how to order, cont. accessories cable sealing adapters - these are the basic connector accessories which provide moisture proofing and cable strain relief. selection is made on the basis of accessory style, shell size and cable dimensions. to illustrate the ordering proce- dure, part number 10-101335-361 is shown as follows: part number 10 - 101335 -361 12 see code below: 1. accessory base number - refer to pages 41 through 52 for descriptions and dimensional data.10-101332 designates short barrel length with woven strain relief grip 10-101333 designates short barrel length without strain relief 10-101334 designates short barrel length with woven strain relief grip and attaching ring for protection cap with bead chain 10-101335 designates short barrel length with attaching ring for protection cap with bead chain 10-101380 designates short barrel length with attaching ring for protection cap with bead chain and clamp type strain relief bars 10-113637 designates long barrel length with woven strain relief and attaching ring for protection cap with bead chain 2. part number C represents connector shell size and range of cable diameters accommodated by the sealing adapter. refer to the page listed below to determine the part number required for the accessory style being used: accessory series page 10-10133x 46 - 48 10-130380 44 10-113637 50 - 52 cable clamp 10-749xx-( ) and adapter 10-113196-xx connectors which require weatherproofing on open wire cables are provided with a moisture seal by this cable clamp, a modification of the ms3057b design. a rubber grommet with holes for individual wires is used in place of the sleeve. as the assembly is tightened, the grommet is compressed around each wire, sealing out moisture. order this clamp by the part number listed on page 53 to accommodate the connector being used. suffix the part number with the connector insert arrangement number. to attach the cable clamp to the left hand accessory threads of qwl connectors, adapter 10-113196-xx is needed. finish is non-conductive alumilite. order by adapter part number listed on page 53 to accommodate the connector shell size being used. for a moisture proof seal, unused grommet holes must be filled with the appropriate size sealing plug or seal- ing rod selected from the table on page 53. sealing plug or sealing rods must be ordered separately. m85049/1 cable clamp and adapter 10-113138-xx - order this clamp by the m85049( )c part number listed on page 55 to accommodate the cable type being used. to attach the cable clamp to the left hand accessory threads of qwl connec- tors, adapter 10-113138-xx is needed. order by adapter part number listed on page 55 to accommodate the connector shell size being used. standard finish on the clamp is olive drab, cadmium plate. adapter finish is non-conductive alumilite. ms3420-( )a sleeve, to facilitate sealing on smaller diameter cables, must be ordered separately. ms3420-( )a sleeves may be nested to accommodate smaller cable diameters. plug protection caps - 10-101046-( ) designates plug cover with chain, alumilite 225 finish 10-101531-( ) designates plug cover with chain and eyelet end, alumilite 225 finish order these plug covers by the part number listed on page 57 for the appropriate connector shell size. receptacle protection caps - 10-101063-( ) designates receptacle cover with chain, alumilite 225 finish 10-101048-( ) designates receptacle cover with chain and eyelet, alumilite 225 finish order these receptacle covers by the part number listed on page 57 for the appropriate connector shell size. flange gasket - 10-36675-( ) for operating temperature range C67 to +275f 10-40450-( ) for operating temperature range 0 to +257f order by part number listed on page 59 for appropriate connector shell size. 10-183249 grip banding clamp - order this stainless steel clamp by part number listed on page 59 to accommodate cable diameter being used.
6 s r t 4 holes s r b m w kz a thread v left hand qwl 10-1070xx wall mount receptacle all dimensions for reference only. *for complete order number see page 4 part number* shell size a thread class 2a b min full thread k .015 m +.016 C.000 r .005 s .020 t dia +.004 C.003 v thread class 2a-lh w .010 z max 10-107010 10s .6250-0.05p-0.1l-ds .391 .704 .562 .719 1.000 .150 .500-28unef .400 .450 10-107012 12s .7500-0.1p-0.2l-ds .391 .704 .562 .812 1.094 .150 .625-24unef .400 .450 10-107013 12 .7500-0.1p-0.2l-ds .625 .891 .750 .812 1.094 .150 .625-24unef .588 .700 10-107014 14s .8750-0.1p-0.2l-ds .391 .704 .562 .906 1.188 .150 .750-20unef .400 .450 10-107015 14 .8750-0.1p-0.2l-ds .625 .891 .750 .906 1.188 .150 .750-20unef .588 .700 10-107016 16s 1.0000-0.1p-0.2l-ds .391 .704 .562 .969 1.281 .150 .875-20unef .400 .450 10-107017 16 1.0000-0.1p-0.2l-ds .625 .891 .750 .969 1.281 .150 .875-20unef .588 .700 10-107018 18 1.1250-0.1p-0.2l-ds .625 .906 .750 1.062 1.375 .177 1.000-20unef .573 .686 10-107020 20 1.2500-0.1p-0.2l-ds .625 .906 .750 1.156 1.500 .177 1.125-18nef .573 .686 10-107022 22 1.3750-0.1p-0.2l-ds .625 .906 .750 1.250 1.625 .177 1.250-18nef .573 .686 10-107024 24 1.5000-0.1p-0.2l-ds .625 .968 .812 1.375 1.750 .177 1.375-18nef .573 .624 10-107028 28 1.7500-0.1p-0.2l-ds .625 .968 .812 1.562 2.000 .177 1.625-18nef .573 .624 10-107032 32 2.0000-0.1p-0.2l-ds .625 1.031 .875 1.750 2.250 .209 1.875-16n .573 .561 10-107036 36 2.2500-0.1p-0.2l-ds .625 1.031 .875 1.938 2.500 .209 2.0625-16n .573 .561 10-107040 40 2.5000-0.1p-0.2l-ds .625 1.031 .875 2.188 2.750 .209 2.3125-16n .573 .561 10-107044 44 2.7500-0.1p-0.2l-ds .625 1.031 .875 2.375 3.000 .209 2.625-16un .698 .801
7 s s m w kz a thread v left hand qwl 10-1071xx cable connecting plug all dimensions for reference only. *for complete order number see page 4 part number* shell size a thread (plated) class 2a k .015 m +.016 C.000 s .020 v thread class 2a-lh w .010 z max 10-107110 10s .6250-0.05p-0.1l-ds .704 .453 .750 .500-28unef .400 .450 10-107112 12s .7500-0.1p-0.2l-ds .704 .453 .875 .625-24unef .400 .450 10-107113 12 .7500-0.1p-0.2l-ds .891 .641 .875 .625-24unef .588 .701 10-107114 14s .8750-0.1p-0.2l-ds .704 .453 1.000 .750-20unef .400 .450 10-107115 14 .8750-0.1p-0.2l-ds .891 .641 1.000 .750-20unef .588 .701 10-107116 16s 1.0000-0.1p-0.2l-ds .704 .453 1.094 .875-20unef .400 .450 10-107117 16 1.0000-0.1p-0.2l-ds .891 .641 1.094 .875-20unef .588 .701 10-107118 18 1.1250-0.1p-0.2l-ds .906 .656 1.281 1.000-20unef .573 .686 10-107120 20 1.2500-0.1p-0.2l-ds .906 .656 1.375 1.125-18unef .573 .686 10-107122 22 1.3750-0.1p-0.2l-ds .906 .656 1.500 1.250-18unef .573 .686 10-107124 24 1.5000-0.1p-0.2l-ds .968 .719 1.625 1.375-18unef .573 .624 10-107128 28 1.7500-0.1p-0.2l-ds .968 .719 1.875 1.625-18unef .573 .624 10-107132 32 2.0000-0.1p-0.2l-ds 1.031 .656 2.125 1.875-16un .573 .561 10-107136 36 2.2500-0.1p-0.2l-ds 1.031 .656 2.375 2.0625-16uns .573 .561 10-107140 40 2.5000-0.1p-0.2l-ds 1.031 .656 2.625 2.3125-16uns .573 .561 10-107144 44 2.7500-0.1p-0.2l-ds 1.031 .656 3.000 2.625-16un .698 .800 10-107148 48 3.0000-0.1p-0.2l-ds 1.031 .656 3.125 2.875-16un .698 .800
8 s r t 4 holes s r b m w kz a y qwl 10-1072xx box mount receptacle all dimensions for reference only. *for complete order number see page 4 part number* shell size a thread (plated) class 2a b min full thread k +.026 C.010 m +.016 C.000 r .005 s .020 t dia +.004 C.003 w +.020 C.036 y dia .010 z max 10-107210 10s .6250-0.05p-0.1l-ds .391 .703 .562 .719 1.000 .150 .281 .469 .451 10-107212 12s .7500-0.1p-0.2l-ds .391 .703 .562 .812 1.094 .150 .281 .594 .451 10-107213 12 .7500-0.1p-0.2l-ds .625 .891 .750 .812 1.094 .150 .469 .594 .700 10-107214 14s .8750-0.1p-0.2l-ds .391 .703 .562 .906 1.188 .150 .281 .719 .451 10-107215 14 .8750-0.1p-0.2l-ds .625 .891 .750 .906 1.188 .150 .469 .719 .700 10-107216 16s 1.0000-0.1p-0.2l-ds .391 .703 .562 .969 1.281 .150 .281 .844 .451 10-107217 16 1.0000-0.1p-0.2l-ds .625 .891 .750 .969 1.281 .150 .469 .844 .700 10-107218 18 1.1250-0.1p-0.2l-ds .625 .906 .750 1.062 1.375 .177 .453 .969 .686 10-107220 20 1.2500-0.1p-0.2l-ds .625 .906 .750 1.156 1.500 .177 .453 1.125 .686 10-107222 22 1.3750-0.1p-0.2l-ds .625 .906 .750 1.250 1.625 .177 .453 1.250 .686 10-107224 24 1.5000-0.1p-0.2l-ds .625 1.000 .812 1.375 1.750 .177 .359 1.375 .585 10-107228 28 1.7500-0.1p-0.2l-ds .625 1.000 .812 1.562 2.000 .177 .359 1.594 .591 10-107232 32 2.0000-0.1p-0.2l-ds .625 1.063 .875 1.750 2.250 .209 .296 1.844 .528 10-107236 36 2.2500-0.1p-0.2l-ds .625 1.063 .875 1.938 2.500 .209 .296 2.031 .528 10-107240 40 2.5000-0.1p-0.2l-ds .625 1.063 .875 2.188 2.750 .209 .296 2.281 .528 10-107244 44 2.7500-0.1p-0.2l-ds .625 1.063 .875 2.375 3.000 .209 .546 2.562 .769 10-107248 48 3.0000-0.1p-0.2l-ds .625 1.063 .875 2.625 3.250 .209 .546 2.812 .769
9 qwl 10-1073xx jam nut receptacle (wall mount) all dimensions for reference only. *for complete order number see page 4. part number* shell size a thread class 2a b .010 e thread class 2a f hex .010 h panel thickness m .010 n .015 p .010 s .010 v thread class 2a-lh w .010 z max min max 10-107310 10s .6250-0.5-0.1l-ds .385 .6875-24unef .875 .094 .227 .844 .469 .375 1.062 .500-28unef .344 .295 10-107312 12s .7500-0.1p-0.2l-ds .385 .875-20unef 1.062 .094 .200 .906 .469 .442 1.250 .625-24unef .344 .232 10-107313 12 .7500-0.1p-0.2l-ds .585 .875-20unef 1.062 .094 .188 1.094 .641 .442 1.250 .625-24unef .516 .483 10-107314 14s .8750-0.1p-0.2l-ds .385 1.000-20unef 1.250 .094 .200 .906 .469 .486 1.376 .750-20unef .344 .232 10-107315 14 .8750-0.1p-0.2l-ds .585 1.000-20unef 1.250 .094 .188 1.094 .641 .486 1.376 .750-20unef .516 .483 10-107316 16s 1.0000-0.1p-0.2l-ds .385 1.125-18unef 1.312 .094 .200 .906 .469 .530 1.500 .875-20unef .344 .232 10-107317 16 1.0000-0.1p-0.2l-ds .585 1.125-18unef 1.312 .094 .188 1.094 .641 .530 1.500 .875-20unef .516 .483 10-107318 18 1.1250-0.1p-0.2l-ds .585 1.250-18unef 1.500 .094 .203 1.109 .704 .623 1.750 1.000-20unef .516 .467 10-107320 20 1.2500-0.1p-0.2l-ds .585 1.375-18unef 1.562 .094 .203 1.109 .704 .663 1.875 1.125-18unef .516 .467 10-107322 22 1.3750-0.1p-0.2l-ds .585 1.500-18unef 1.750 .094 .203 1.109 .704 .707 2.000 1.250-18unef .516 .467 10-107324 24 1.5000-0.1p-0.2l-ds .585 1.625-18unef 1.875 .094 .265 1.172 .704 .751 2.125 1.375-18unef .516 .404 10-107328 28 1.7500-0.1p-0.2l-ds .585 1.875-16unef 2.125 .094 .265 1.172 .704 .840 2.375 1.625-18unef .516 .404 10-107332 32 2.0000-0.1p-0.2l-ds .585 2.125-16unef 2.375 .094 .203 1.172 .735 .928 2.625 1.875-16un .516 .404 10-107336 36 2.2500-0.1p-0.2l-ds .585 2.375-16un 2.625 .094 .203 1.172 .735 1.017 2.875 2.0625-16un .516 .404 10-107340 40 2.5000-0.1p-0.2l-ds .585 2.625-16un 2.875 .094 .203 1.172 .735 1.104 3.125 2.3125-16un .516 .404 10-107344 44 2.7500-0.1p-0.2l-ds .585 2.875-16un 3.125 .094 .265 1.234 .922 1.213 3.406 2.625-16un .703 .593 10-107348 48 3.0000-0.1p-0.2l-ds .585 3.125-16un 3.375 .094 .265 1.234 .922 1.299 3.656 2.875-16un .703 .593 shell size k dia +.005 C.000 g .003 u .005 10 .880 .518 .625 12, 13 1.005 .562 .688 14, 15 1.130 .606 .750 16, 17 1.255 .699 .875 18 1.380 .739 .938 20 1.505 .783 1.000 22 1.630 .830 1.062 24 1.880 .919 1.188 28 2.130 1.007 1.312 32 2.380 1.096 1.438 36 2.630 1.183 1.562 40 2.880 1.292 1.703 mounting dimensions s f p s p m h z n a v left hand b e w u g k u g .125 .002 dia. pin
10 qwl 10-1074xx thru bulkhead receptacle all dimensions for reference only. *for complete order number see page 4 part number* shell size a thread class 2a b min full thread c ref g max bulkhead thickness l .015 m +.000 C.010 r .005 s .020 t dia +.004 C.003 10-107410 10s .6250-0.05p-0.1l-ds .406 .141 .266 1.563 .711 .719 1.000 .120 10-107412 12s .7500-0.1p-0.2l-ds .406 .141 .266 1.563 .711 .812 1.094 .120 10-107413 12 .7500-0.1p-0.2l-ds .625 .155 .312 2.125 .985 .812 1.094 .120 10-107414 14s .8750-0.1p-0.2l-ds .406 .141 .266 1.563 .711 .906 1.188 .120 10-107415 14 .8750-0.1p-0.2l-ds .625 .155 .312 2.125 .985 .906 1.188 .120 10-107416 16s 1.0000-0.1p-0.2l-ds .406 .141 .266 1.563 .711 .969 1.281 .120 10-107417 16 1.0000-0.1p-0.2l-ds .625 .155 .312 2.125 .985 .969 1.281 .120 10-107418 18 1.1250-0.1p-0.2l-ds .625 .155 .312 2.125 .985 1.062 1.375 .120 10-107420 20 1.2500-0.1p-0.2l-ds .625 .155 .312 2.125 .985 1.156 1.500 .120 10-107422 22 1.3750-0.1p-0.2l-ds .625 .155 .312 2.125 .985 1.250 1.625 .120 10-107424 24 1.5000-0.1p-0.2l-ds .625 .155 .312 2.125 .985 1.375 1.750 .147 10-107428 28 1.7500-0.1p-0.2l-ds .625 .155 .312 2.125 .985 1.562 2.000 .147 10-107432 32 2.0000-0.1p-0.2l-ds .625 .155 .312 2.125 .985 1.750 2.250 .173 10-107436 36 2.2500-0.1p-0.2l-ds .625 .155 .312 2.125 .985 1.938 2.500 .173 10-107440 40 2.5000-0.1p-0.2l-ds .625 .155 .312 2.125 .985 2.188 2.750 .173 10-107444 44 2.7500-0.1p-0.2l-ds .625 .155 .438 2.375 1.110 2.375 3.000 .209 s r t 4 holes s r b m m g l c a b a
11 zj b n d v left hand g a q qwl 10-1076xx straight plug all dimensions for reference only. *for complete order number see page 4 **applicable tolerance is .033 ***applicable tolerance is +.030 C.020 ?applicable tolerance is .026 ??applicable tolerance is +.013 C.023 part number* shell size a thread class 2b b .020 d dia +.010 C.000 g .030 j .005 n .010 q dia max v thread (plated) class 2a-lh z max 10-107610 10s .6250-0.05p-0.1l-ds .406 .735 .053 .531 .563 .882 .500-28unef .603 10-107612 12s .7500-0.1p-0.2l-ds .406 .859 .109 .531 .563 1.010 .625-24unef .603 10-107613 12 .7500-0.1p-0.2l-ds .578 .859 .077 .719 .750 1.010 .625-24unef .852 10-107614 14s .8750-0.1p-0.2l-ds .406 .985 .234 .531 .563 1.137 .750-20unef .603 10-107615 14 .8750-0.1p-0.2l-ds .578 .985 .077 .719 .750 1.137 .750-20unef .852 10-107616 16s 1.0000-0.1p-0.2l-ds .406 1.109 .234 .531 .563 1.264 .875-20unef .603 10-107617 16 1.0000-0.1p-0.2l-ds .578 1.109 .141 .719 .750 1.264 .875-20unef .852 10-107618 18 1.1250-0.1p-0.2l-ds .578 1.235 .266 .719 .750 1.455 1.000-20unef .852 10-107620 20 1.2500-0.1p-0.2l-ds .578 1.359 .266 .719 .750 1.551 1.1250-18unef .852 10-107622 22 1.3750-0.1p-0.2l-ds .578 1.485 .266 .719 .750 1.678 1.2500-18unef .852 10-107624 24 1.5000-0.1p-0.2l-ds .594 1.609 .266 .719 .812 1.806 1.375-18unef .852 10-107628 28 1.7500-0.1p-0.2l-ds .594 1.859 .266 .719 .812 2.060 1.625-18unef .852 10-107632 32 2.0000-0.1p-0.2l-ds .594 2.109 .266 .719 .875 2.315 1.875-16un .852 10-107636 36 2.2500-0.1p-0.2l-ds .556? 2.359 .285** .719 .875 2.569 2.0625-16uns .852 10-107640 40 2.5000-0.1p-0.2l-ds .556? 2.609 .285** .719 .875 2.824 2.3125-16uns .852 10-107644 44 2.7500-0.1p-0.2l-ds .700?? 2.922 .141*** .719 1.000 3.142 2.625-16un 1.103 10-107648 48 3.0000-0.1p-0.2l-ds .719 3.172 .141 .719 1.000 3.381 2.875-16un 1.093
12 qwl 10-1077xx flange mount plug all dimensions for reference only. *for complete order number see page 4 part number* shell size a thread class 2b c .005 j .005 n .020 r .005 s .020 t thread z max 10-107710 10s .6250-0.05p-0.1l-ds .125 .531 .438 .562 .781 4-40 nc .602 10-107712 12s .7500-0.1p-0.2l-ds .156 .531 .438 .812 1.062 4-40 nc .602 10-107713 12 .7500-0.1p-0.2l-ds .156 .719 .688 .812 1.062 4-40 nc .852 10-107714 14s .8750-0.1p-0.2l-ds .156 .531 .438 .812 1.062 4-40 nc .602 10-107715 14 .8750-0.1p-0.2l-ds .156 .719 .688 .812 1.062 4-40 nc .852 10-107716 16s 1.0000-0.1p-0.2l-ds .156 .531 .438 1.000 1.312 6-32 nc .602 10-107717 16 1.0000-0.1p-0.2l-ds .156 .719 .688 1.000 1.312 6-32 nc .852 10-107718 18 1.1250-0.1p-0.2l-ds .156 .719 .688 1.000 1.312 6-32 nc .852 10-107720 20 1.2500-0.1p-0.2l-ds .188 .719 .688 1.250 1.625 10-32 nf .852 10-107722 22 1.3750-0.1p-0.2l-ds .188 .719 .688 1.250 1.625 10-32 nf .852 10-107724 24 1.5000-0.1p-0.2l-ds .188 .719 .688 1.562 2.000 10-32 nf .852 10-107728 28 1.7500-0.1p-0.2l-ds .188 .719 .688 1.562 2.000 10-32 nf .852 10-107732 32 2.0000-0.1p-0.2l-ds .250 .719 .781 1.812 2.500 10-32 nf .852 10-107736 36 2.2500-0.1p-0.2l-ds .250 .719 .781 1.812 2.500 10-32 nf .852 10-107740 40 2.5000-0.1p-0.2l-ds .250 .719 .781 2.250 3.031 10-32 nf .852 10-107744 44 2.7500-0.1p-0.2l-ds .250 .719 1.000 2.375 3.031 10-32 nf .852 10-107748 48 3.0000-0.1p-0.2l-ds .250 .719 1.000 2.562 3.250 10-32 nf .852 t 4 holes s r a c j z n s r
13 qwl 10-1079xx jam nut receptacle (box mount) all dimensions for reference only. *for complete order number see page 4. part number* shell size a thread class 2a b .010 c .005 e thread class 2a (plated) f hex .016 h panel thickness m .010 p .010 s .010 z max min max 10-107910 10s .6250-0.05p-0.1l-ds .385 .125 .6875-24nef .875 .094 .227 .844 .375 1.062 .295 10-107912 12s .7500-0.1p-0.2l-ds .385 .125 .875-20unef 1.062 .094 .200 .906 .442 1.250 .232 10-107913 12 .7500-0.1p-0.2l-ds .585 .125 .875-20unef 1.062 .094 .282 1.188 .442 1.250 .389 10-107914 14s .8750-0.1p-0.2l-ds .385 .125 1.000-20unef 1.250 .094 .200 .906 .486 1.376 .232 10-107915 14 .8750-0.1p-0.2l-ds .585 .125 1.000-20unef 1.250 .094 .282 1.188 .486 1.376 .389 10-107916 16s 1.0000-0.1p-0.2l-ds .385 .125 1.125-18nef 1.312 .094 .200 .906 .530 1.500 .232 10-107917 16 1.0000-0.1p-0.2l-ds .585 .125 1.125-18nef 1.312 .094 .282 1.188 .530 1.500 .389 10-107918 18 1.1250-0.1p-0.2l-ds .585 .188 1.250-18nef 1.500 .094 .250 1.156 .623 1.750 .420 10-107920 20 1.2500-0.1p-0.2l-ds .585 .188 1.375-18nef 1.562 .094 .250 1.156 .663 1.875 .420 10-107922 22 1.3750-0.1p-0.2l-ds .585 .188 1.500-18nef 1.750 .094 .250 1.156 .707 2.000 .420 10-107924 24 1.5000-0.1p-0.2l-ds .585 .188 1.625-18nef 1.875 .094 .312 1.219 .751 2.125 .357 10-107928 28 1.7500-0.1p-0.2l-ds .585 .188 1.875-16un 2.125 .094 .312 1.219 .840 2.375 .357 10-107932 32 2.0000-0.1p-0.2l-ds .585 .219 2.125-16un 2.375 .094 .282 1.250 .928 2.625 .326 10-107936 36 2.2500-0.1p-0.2l-ds .585 .219 2.375-16un 2.625 .094 .282 1.250 1.017 2.875 .326 10-107940 40 2.5000-0.1p-0.2l-ds .585 .219 2.625-16un 2.875 .094 .282 1.250 1.104 3.125 .326 10-107944 44 2.7500-0.1p-0.2l-ds .585 .219 2.875-16un 3.125 .094 .422 1.390 1.213 3.406 .436 10-107948 48 3.0000-0.1p-0.2l-ds .585 .219 3.125-16un 3.375 .094 .422 1.390 1.299 3.656 .436 shell size k dia +.005 C.000 g .003 u .005 10 .693 .451 .531 12, 13 .880 .518 .625 14, 15 1.005 .562 .688 16, 17 1.130 .606 .750 18 1.255 .699 .875 20 1.380 .739 .938 22 1.505 .783 1.000 24 1.630 .830 1.062 28 1.880 .919 1.188 32 2.130 1.007 1.312 36 2.380 1.096 1.438 40 2.630 1.183 1.562 44 2.880 1.292 1.703 48 3.130 1.378 1.828 mounting dimensions u g k u g .125 .002 dia. pin s f p s p m h c z a b e
14 qwl insert arrangements - selection guide insert arrangement service rating total contacts contact size 0 4 8 12 16 10s-2 a 1 1 12s-3 a 2 2 12s-4 d 1 1 12-5 d 1 1 14s-1 a 3 3 14s-2 inst. 4 4 14s-4 d 1 1 14s-5 inst. 5 5 14s-6 inst. 6 6 14s-7 a 3 3 14s-9 a 2 2 14s-10 inst. 4 4 14s-12 a 3 3 14-3 a 1 1 16s-1 a 7 7 16s-3 b 1 1 16s-4 d 2 2 16s-5 a 3 3 16s-6 a 3 3 16s-8 a 5 5 16-2 e 1 1 16-7 a 3 1 2 16-9 a 4 2 2 16-10 a 3 3 16-11 a 2 2 16-12 a 1 1 16-13 a 2 2 18-1 a/inst. 10 10 18-3 d 2 2 18-4 d 4 4 18-5 d 3 2 1 18-6 d 1 1 18-7 b 1 1 18-8 a 8 1 7 18-9 inst. 7 2 5 18-10 a 4 4 18-11 a 5 5 18-12 a 6 6 18-13 a 4 1 3 18-14 a 2 1 1 18-15 a 4 4 18-16 c 1 1 18-17 inst. 7 2 5 18-19 a 10 10 18-20 a 5 5 18-22 d 3 3 18-24 a/inst. 10 10 18-29 a 5 5 18-30 a 5 5 18-31 a 5 5 20-2 d 1 1 20-3 d 3 3 20-4 d 4 4 20-6 d 3 3 20-7 d/a 8 8 20-8 inst. 6 2 4 20-9 d/a 8 1 7 20-11 inst. 13 13 20-12 a 2 1 1 20-14 a 5 2 3 20-15 a 7 7 20-16 a 9 2 7 20-17 a 6 5 1 20-18 a 9 3 6 20-19 a 3 3 20-20 a 4 1 3 20-21 a 9 1 8 20-22 a 6 3 3 20-23 a 2 2 20-24 a 4 2 2 20-25 inst. 13 13 20-27 a 14 14 20-29 a 17 17 20-30 inst. 13 13 20-33 a 11 11 22-1 d 2 2 22-2 d 3 3 22-4 a 4 2 2 22-5 d 6 2 4 22-6 d 3 2 1 22-7 e 1 1 22-8 e 2 2 22-9 e 3 3 22-10 e 4 4 22-11 b 2 2 22-12 d 5 2 3 22-13 d/a 5 4 1 22-14 a 19 19 22-15 e/a 6 5 1 22-16 a 9 3 6 22-17 d/a 9 1 8 22-18 d/a 8 8 22-19 a 14 14 22-20 a 9 9 22-21 a 3 1 2 22-22 a 4 4 22-23 d/a 8 8 22-24 d/a 6 2 4 22-27 d/a 9 1 8 22-28 a 7 7 insert arrangement service rating total contacts contact size 0481216
15 qwl insert arrangements, cont. insert arrangement service rating total contacts contact size 0481216 22-33 d/a 7 7 22-34 d 5 3 2 22-36 d/a 8 8 24-2 d 7 7 24-3 d 7 2 5 24-5 a 16 16 24-6 d/a 8 8 24-7 a 16 2 14 24-9 a 2 2 24-10 a 7 7 24-11 a 9 3 6 24-12 a 5 2 3 24-16 d/a 7 133 24-17 d 5 2 3 24-20 d 11 2 9 24-21 d 10 1 9 24-22 d 4 4 24-27 e 7 7 24-28 inst. 24 24 28-1 d/a 9 3 6 28-2 d 14 2 12 28-3 e 3 3 28-4 e/d 9 2 7 28-5 d 5 2 1 2 28-6 d 3 3 28-7 d 2 2 28-8 e/d/a 12 2 10 28-9 d 12 6 6 28-10 d/a 7 223 28-11 a 22 4 18 28-12 a 26 26 28-13 a 26 26 28-15 a 35 35 28-16 a 20 20 28-17 b/d/a 15 15 28-18 c/d/a/inst. 12 12 28-19 b/d/a 10 4 6 28-20 a 14 10 4 28-21 a 37 37 28-22 d 6 3 3 32-1 e/d 5 2 3 32-2 e 5 3 2 32-3 d 9 12 24 32-4 a/d 14 2 12 32-5 d 2 2 32-6 a 23 2 3 2 16 32-7 inst./a 35 7 28 32-8 a 30 6 24 32-9 d 14 2 12 32-10 e/b/d/a 7 2 2 3 32-12 a/d 15 5 10 32-13 d 23 5 18 32-15 d 8 2 6 32-16 a 23 2 3 2 16 32-17 d 4 4 32-22 a 54 54 36-1 d 22 4 18 36-3 d 6 3 3 36-4 d/a 3 3 36-5 a 4 4 36-6 a 6 2 4 36-7 a 47 7 40 36-8 a 47 1 46 36-9 a 31 1 2 14 14 36-10 a 48 48 36-11 a 48 48 36-12 a 48 48 36-13 e/a 17 2 15 36-14 d 16 5 5 6 36-15 d/a 35 35 36-16 a 47 7 40 36-17 a 47 7 40 36-18 a 31 1 2 14 14 36-20 a 34 2 2 30 36-52 a 52 52 40-1 d 30 6 24 40-9 a 47 1 22 24 40-56 a 85 85 48-62 d 85 85 insert arrangement service rating total contacts contact size 0481216
16 qwl special insert arrangements insert arrange ment service rating total con- tacts contact size 4/0 2/0 0 4 8 12 16 coax** 04812 14s-a7 a 7 7 16-59 a 4 4 20-26 a 19 19 20-51 a 3 3 20-57 a 7 7* 20-58 a 10 5 5 20-59 a 3 3* 20-66 a 6 5* 1 20-79 a/d 8 1 7 22-63 a 12 4 8 22-65 a/d 8 8* 22-70 a 13 8 5 22-80 a 3 3* 24-19 a 12 12 24-51 a 5 5 24-52 hi volt. 1 1 24-53 a 5 5 24-58 a 13 3 3 7 24-59 a 14 7 7 24-60 a 7 7* 24-65 a 15 11 4 24-66 d 7 7 24-67 inst. 19 19 24-71 a 7 7* 24-75 a 7 7* 24-79 a 5 5 24-80 inst. 23 23 24-84 a 19 1 18 24-96 inst. 28 28 24-aj a 25 25 28-51 a 12 12 28-59 a 17 7 10 28-66 a 16 2 14 28-72 coax 3 3 28-74 a 16 7* 9 28-75 a 16 7* 9 28-79 a 16 7 9 28-82 d 6 2 4 28-84 a 9 9 28-ay a 9 4 5 32-25 a 25 25 32-31 a 31 31 32-48 inst. 48 48 32-52 d 8 2 6 32-53 inst./e 42 5 37 32-56 a 30 6* 24 32-57 coax 8 6 2 32-58 coax 4 4 32-60 a 23 15 8 32-62 coax 23 2 1 2 16 2 32-64 inst. 54 54 32-68 a 16 12 4 32-73 a 46 46 32-75 coax 9 2 7 32-76 a 19 19 32-79 d 5 4 1 32-82 a 16 4 12 32-af a 55 55 36-51 d 4 2 2 36-54 a 39 8 31 36-55 a 39 8* 31 36-59 a 53 3* 50 36-60 a 47 7* 40 36-64 coax 4 4 36-65 coax 4 4 36-71 a 53 3 50 36-73 coax 7 7 36-74 a 44 43 1 36-75 a 48 48* 36-76 a 47 47 36-77 d 7 7 36-78 a 14 12 2 36-79 a 20 20 36-80 a 20 20* 36-83 coax 7 7 36-85 a/d 35 35* 36-97 c 1 1 36-af a 48 48 40-5 a 5 5 40-10 a 29 4 9 16 40-35 d 35 35 40-53 a 60 60 40-57 e 4 4 40-61 a 59 1 3 55 40-62 a 60 60 40-63 a 61 61* 40-64 coax 36 3 20 13 40-66 coax 4 4 40-67 a 11 1 10 40-68 a 21 21 40-70 a 61 61 40-72 a 11 1 10 40-73 a 61 61 40-74 a 6 1 4 1 40-75 e 5 4 1 40-80 a 11 10 1 40-81 a 62 62* 40-82 a 62 62 40-85 a 60 60* 40-86 e 4 4 40-87 d 7 7 40-ad a 8 4 4 40-ag a 38 38 40-ap e 2 2 40-ar inst. 13 3 3 7 40-as a 40 25 15 40-at a 43 1 24 18 40-au a 14 3 10 1 40-av d 3 3 44-52 a 104 104 44-53 a 36 18 18 48-51 a 56 10 42 4 48-52 a 61 56 5 48-53 d 37 37 48-54 a 56 10 42 4 48-55 a 78 6 2 2 68 48-57 a 56 4 10 42 48-60 a 56 10 42 4 insert arrange ment service rating total con- tacts contact size 4/02/00481216 coax** 04812 * crimp contacts accommodate wire the same size as the contact as well as wire of the next smaller, even size. arrangements identified with an asterisk (*) are excep- tions. see insert arrangement drawings on pages 18-40 for application wire size. ** coaxial cable data can be found on insert arrangement drawings, pages 38-48. for further information on coaxial contacts and cable see catalog 12-130. consult sidney, ny for alternate rotations not covered on page 17.
17 qwl alternate positioning to avoid cross-plugging problems in applications requir- ing the use of more than one connector of the same size and arrangement, alternate rotations are available as indicated in the accompanying charts. as shown in the diagram below, the front face of the pin insert is rotated within the shell in a clockwise direction from the normal shell key. the socket insert would be rotated counter-clockwise the same number of degrees in respect to the normal shell key. position w position x position y position z view looking into front face of pin insert or rear of socket insert. the following insert arrangements have the same alter- nate insert rotations for w, x, y and z, which are: degrees wx yz 80 110 250 280 16-7 20-22 22-29 24-17 28-16 32-13 18-5 22-6 22-33 24-20 28-17 32-22 18-9 22-12 22-34 24-21 28-19 32-af 18-13 22-14 24-1 24-28 28-20 36-1 18-14 22-15 24-3 28-1 28-21 36-7 20-7 22-16 24-4 28-4 32-1 36-8 20-8 22-17 24-5 28-8 32-3 36-13 20-9 22-18 24-6 28-9 32-4 40-ar 20-12 22-19 24-7 28-10 32-6 40-as 20-14 22-21 24-12 28-11 32-9 40-at 20-16 22-24 24-14 28-14 32-10 40-au 20-20 22-25 24-16 28-15 32-12 insert arrangement degrees wx y z 10sl-463CCC 12s-3 70 145 215 290 14s-2 C 120 240 C 14s-5 C 110 C C 14s-7 90 180 270 C 14s-9 70 145 215 290 16-9 35 110 250 325 16-10 90 180 270 C 16-11 35 110 250 325 16-13 35 110 250 325 16s-1 80 C C 280 16s-4 35 110 250 325 16s-5 70 145 215 290 16s-6 90 180 270 C 16s-8 C 170 265 C 18-1 70 145 215 290 18-3 35 110 250 325 18-4 35 110 250 325 18-8 70 C C 290 18-10 C 120 240 C 18-11 C 170 265 C 18-12 80 C C 280 18-15 C 120 240 C 18-20 90 180 270 C 18-22 70 145 215 290 18-29 90 180 270 C 20-3 70 145 215 290 20-4 45 110 250 C 20-5 35 110 250 325 20-6 70 145 215 290 20-15 80 C C 280 20-17 90 180 270 C 20-18 35 110 250 325 20-19 90 180 270 C 20-21 35 110 250 325 20-23 35 110 250 325 20-24 35 110 250 325 20-27 35 110 250 325 20-29 80 C C 280 22-1 35 110 250 325 22-2 70 145 215 290 22-4 35 110 250 325 22-5 35 110 250 325 22-8 35 110 250 325 22-9 70 145 215 290 22-10 35 110 250 325 22-11 35 110 250 325 22-13 35 110 250 325 22-20 35 110 250 325 22-22 C 110 250 C 22-23 35 C 250 C 22-27 80 C 250 280 22-28 80 C C 280 22-63 20CCC 24-2 80 C C 280 24-9 35 110 250 325 24-10 80 C C 280 24-11 35 110 250 325 24-22 45 110 250 C 24-27 80 C C 280 28-2 35 110 250 325 28-3 70 145 215 290 28-5 35 110 250 325 28-6 70 145 215 290 insert arrangement degrees wx y z 28-7 35 110 250 325 28-12 90 180 270 C 28-18 70 145 215 290 28-22 70 145 215 290 28-ay 45 110 250 C 32-2 70 145 215 290 32-5 35 110 250 325 32-7 80 125 235 280 32-8 80 125 235 280 32-15 35 110 250 280 32-17 45 110 250 C 32-25 60 120 C C 32-48 80 C C C 32-64 80 100 110 250 32-68 30 C C C 32-82 30 C C C 36-3 70 145 215 290 36-4 70 145 215 290 36-5 C 120 240 C 36-6 35 110 250 325 36-9 80 125 235 280 36-10 80 125 235 280 36-14 90 180 270 C 36-15 60 125 245 305 36-af 65 C C C 40-1 65 130 235 300 40-5 33 C C 270 40-9 65 125 225 310 40-10 65 125 225 310 40-35 70 130 230 290 40-ad 45 C C C 40-ag 37 74 285 322 40-ap 35 110 250 325 40-av 90 180 270 C insert arrangement degrees wx y z a b a b a b a b
18 f ront face of pin insert or rear face of socket insert illustrated qwl contact arrangements insert arrangement 10s-2 12s-3 12s-4 12-5 14s-1 14s-2 service rating aaadainst. number of contacts 1 2 1 1 3 4 contact size 16 16 16 12 16 16 insert arrangement 14s-4 14s-5 14s-6 14s-7 14s-9 14s-10 service rating d inst. inst. a a inst. number of contacts 1 5 6 3 2 4 contact size 16 16 16 16 16 16 insert arrangement 14s-12 14-3 16s-1 16s-3 16s-4 16s-5 service rating aaabda number of contacts 3 1 7 1 2 3 contact size 16 8 16 16 16 16 insert arrangement 16s-6 16s-8 16-2 16-7 16-9 service rating a a e a a number of contacts 3 5 1 1 2 2 2 contact size 16 16 12 8 16 12 16 contact legend 16 12 8 4 0 100 rotation of 14s-2 100 rotation of 14s-7 ba a b c d a b c d e f a b c d e a b c a b 100? a b c d 100? a b c a b c d e f g a b a b c a b c a b c d e a b c a b c d a b c
19 f ront face of pin insert or rear face of socket insert illustrated qwl contact arrangements insert arrangement 16-10 16-11 16-12 16-13 18-1 18-3 service rating aaaab, c, f, g = a; bal. = inst.d number of contacts 3 2 1 2* 10 2 contact size 12 12 4 12 16 12 insert arrangement 18-4 18-5 18-6 18-7 18-8 18-9 service rating d d d b a inst. number of contacts 4211 11725 contact size 16 12 16 4 8 12 16 12 16 insert arrangement 18-10 18-11 18-12 18-13 18-14 18-15 service rating a a a a a a number of contacts 4 5 6 1 3 1 1 4** contact size 12 12 16 8 12 4 16 12 insert arrangement 18-16 18-17 18-19 18-20 18-22 18-24 service rating c inst. a a d b, c, f, g = a; bal. = inst. number of contacts 1 2 5 10 5 3 10 contact size 12 12 16 16 16 16 16 contact legend 16 12 8 4 0 * a = iron; b = constantan ** a, c = iron; b, d = constantan 100 rotation of 18-9 250 rotation of 18-1 a b c a b c d b c a a b a b a b c d e f g h i j a b a b c d a b c d e f g h a b c d e f g a b c d a b c d e a b c d e f a b a b c d a b c d ef g h k j ab c d e ab g 100? a b c d e f g 250? a b c d e f g h i j
20 f ront face of pin insert or rear face of socket insert illustrated qwl contact arrangements insert arrangement 18-29 18-30 18-31 20-2 20-3 20-4 service rating a a a d d d number of contacts 5 5 5 1 3 4 contact size 16 16 16 0 12 12 insert arrangement 20-6 20-7 20-8 20-9 20-11 20-12 service rating d a, b, h, g = d; c, d, e, f = a inst. h = d; bal. = a inst. a number of contacts 3 8 24 17 13 11 contact size 16 16 8 16 12 16 16 4 16 insert arrangement 20-14 20-15 20-16 20-17 20-18 20-19 service rating a a a a a a number of contacts 2 3 7 2 7 5 1 3 6 3 contact size 8 12 12 12 16 12 16 12 16 8 contact legend 16 12 8 4 0 110 rotation of 18-20 260 rotation of 18-20 a b c d e a b c a b d c a b c a b c d e f g h a b c d e f a b c d e f g h a bc d e f gh j k l m n a b a b c d e a b c d eg f a b c d e f g h i a b c d e f a b c d e f g h i a b c 110? ab c d e 260? ab c d e
21 f ront face of pin insert or rear face of socket insert illustrated qwl contact arrangements insert arrangement 20-20 20-21 20-22 20-23 20-24 20-25 service rating aaaa a inst. number of contacts 1 3 1 8 3 3 2 2 2 13 contact size 4 12 12 16 8 16 8 8 16 16 insert arrangement 20-27 20-29 20-30 20-33 22-1 22-2 service rating a a inst. a d d number of contacts 14 17 13 11 2 3 contact size 16 16 16 16 8 8 insert arrangement 22-4 22-5 22-6 22-7 22-8 service rating a d d e e number of contacts 22 24 21 1 2 contact size 8 12 12 16 8 16 0 12 contact legend 16 12 8 4 0 250 rotation of 20-11 100 rotation of 20-11 a b c d a b c d e f g h i a b c d e f a b a b c d a b c d e f g h i j k l m n a b c d e f g h j k l m n p t sr a b c d e f k h j m l a b a b c a b c d a b c d e f a b c a b 100? a bc d e f gh j k l m n 250? a bc d e f gh j k l m n
22 f ront face of pin insert or rear face of socket insert illustrated qwl contact arrangements insert arrangement 22-9 22-10 22-11 22-12 22-13 service rating e e b d e = d; a, b, c, d = a number of contacts 3 4 2 2 3 4 1 contact size 12 16 16 8 16 12 16 insert arrangement 22-14 22-15 22-16 22-17 22-18 service rating a d = e; a, b, c, e, f = a a a = d; bal. = a a, b, f, g, h = d; c, d, e = a number of contacts 19 5 1 3 6 1 8 8 contact size 16 12 16 12 16 12 16 16 insert arrangement 22-19 22-20 22-21 22-22 22-23 service rating a a a a h = d; bal. = a number of contacts 14 9 1 2 4 8 contact size 16 16 0 16 8 12 contact legend 16 12 8 4 0 a b c a b c d a b a b c d e a b c d e a b c d e f g h j k l m n u v r s tp a b e f c d a b c d e f gh j a b c d e f g h j a b c d e f g h a b c d e f g h j k l m n p a b c d e f gh j a b c a b c d a b c d e f g h
23 a b c d e f g h f ront face of pin insert or rear face of socket insert illustrated qwl contact arrangements insert arrangement 22-24 22-27 22-28 22-33 22-36 service rating c, d, e = d; a, b, f = a j = d; bal. = a a a, b, c, d = d; e, f, g = a h = d; bal. = a* number of contacts 2 4 1 8 7 7 8 contact size 12 16 8 16 12 16 12 insert arrangement 22-34 24-2 24-3 24-5 24-6 service rating d d d a a, g, h = d; bal. = a number of contacts 3 2 7 2 5 16 8 contact size 12 16 12 12 16 16 12 insert arrangement 24-7 24-9 24-10 24-11 24-12 service rating a a a a a number of contacts 2 14 2 7 3 6 2 3 contact size 12 16 4 8 8 12 4 12 contact legend 16 12 8 4 0 a b c d e f a b c d e f g h j a b c e f g d a b c e f g d a b c d e a b c d e f g a b c e f g d ab c de f g h jk l m n p s r a b c d e f g h a b c d e f g h j k l m n p i o a b a b c d e f g abc def g h i a b c d e * a, c, e, g = iron b, d, f, h = constantan
24 f ront face of pin insert or rear face of socket insert illustrated qwl contact arrangements insert arrangement 24-16 24-17 24-20 24-21 24-22 service rating a, b, f, g = d; c, d, e, = a d d d d number of contacts 133 23 29 19 4 contact size 8 12 16 12 16 12 16 8 16 8 insert arrangement 24-27 24-28 28-1 28-2 28-3 service rating e inst. a, j, e = d; bal. = a d e number of contacts 7 24 3 6 2 12 3 contact size 16 16 8 12 12 16 8 insert arrangement 28-4 28-5 28-6 28-7 service rating g, p, s = e; bal. = d d d d number of contacts 2 7 2 1 2 3 2 contact size 12 16 4 12 16 4 4 contact legend 16 12 8 4 0 a b c d e a b c d e f g h j kl a b c d e f g h jk a b c d a b c d e f g abcd efgh j kl m np q rst u v wx yz a b c d e f g h j a b c d e f g h j k l m n p a b c ab cd p s ef g a b c d e a b c a b a b c d e f g
25 f ront face of pin insert or rear face of socket insert illustrated qwl contact arrangements insert arrangement 28-8 28-9 28-10 28-11 service rating l, m = e; b = d; bal. = a d g = d; bal. = a a number of contacts 2 10 6 6 2 2 3 4 18 contact size 12 16 12 16 4 8 12 12 16 insert arrangement 28-12 28-13 28-15 28-16 service rating a a a a number of contacts 26 26 35 20 contact size 16 16 16 16 insert arrangement 28-17 28-18 28-19 service rating r = b; m, n, p = d; a to l = a m = c; g, h, j, k, l = d; a, b = a; bal. = inst. h, m = b; a, b = d; bal. = a number of contacts 15 12 4 6 contact size 16 16 12 16 contact legend 16 12 8 4 0 100 rotation of 28-12 100? a b c d e f g h j k l m p r n s t u v w x y z a b d a b c d e f g h j k l m a b c d e f g h j k l m a b c d e f g a b c d e f g h j k l m i n p r s t u v w x a b c d e f g h j k l m p r n s t u v w x y z a b d ab c d e f g h j k l m prs t n w x y z u v a b c d e f g h j k m l a b c d e f g h j k l m p q r s t u v n a b c d e f g h j k l m n p r a b c d e f g h j k l m ab c e g h j k l m
26 f ront face of pin insert or rear face of socket insert illustrated qwl contact arrangements insert arrangement 28-20 28-21 28-22 32-1 service rating a a d a = e; b, c, d, e = d number of contacts 10 4 37 3 3 2 3 contact size 12 16 16 4 16 0 12 insert arrangement 32-2 32-3 32-4 32-5 service rating e d f, j, k, n = a; bal. = d d number of contacts 3 2 1 2 2 4 2 12 2 contact size 4 16 0 4 12 16 12 16 0 insert arrangement 32-6 32-7 32-8 32-9 service rating a a, b, h, j = inst.; bal. = a a d number of contacts 2 3 2 16 7 28 6 24 2 12 contact size 4 8 12 16 12 16 12 16 4 16 contact legend 16 12 8 4 0 a b c d e f g h j k l m n p a b c d e f g h j k l m n p r s tu v w x z a b c d e f g h j k m n p rs a b c d e f a b c d e a b c d e a b c def g h j a b c d e f g h j k l m n o a b ab cd ef gh j klmn o p r s t u v w i x a b c d e f g h i j k l m n o p r s t u v w x y z a b c d e f g h j k a b c d e f g h i j k l m n o p r s t u v w x y z a b c d e ab cd e f g hi j k lmn
27 f ront face of pin insert or rear face of socket insert illustrated qwl contact arrangements insert arrangement 32-10 32-12 32-13 32-15 service rating a, f = e; g = b; b, e = d; c, d = a c, d, e, f, g = a; bal. = d d d number of contacts 2 2 3 5 10 5 18 2 6 contact size 4 8 16 12 16 12 16 0 12 insert arrangement 32-16 32-17 32-22 36-1 service rating a d a d number of contacts 2 3 2 16 4 54 4 18 contact size 4 8 12 16 4 16 12 16 insert arrangement 36-3 36-4 36-5 36-6 service rating d a = d; b, c = a a a number of contacts 3 3 3 4 2 4 contact size 0 12 0 0 0 4 contact legend 16 12 8 4 0 100 rotation of 32-6 a b c d e f g ab cd e fg hjk lm op n a b c d e f g h j k l m n p r s t u v w x y z a bc de f g h a b c d ab c d e f g h j k l m no p r s t u v w x y z a b c d e f g h jk m n p r t q s u v x y z aa ab ac ad ae af ag w abc de f g h ijk lmn op r s t uvw a b c d e f a b c a b c d a b c d e f 100? ab cd ef gh i j k lm n o p r s t u v w x
28 f ront face of pin insert or rear face of socket insert illustrated qwl contact arrangements insert arrangement 36-7 36-8 36-9 service rating a a a number of contacts 7 40 1 46 1 2 14 14 contact size 12 16 12 16 4 8 12 16 insert arrangement 36-10 36-11 36-12 service rating a a a number of contacts 48 48 48 contact size 16 16 16 insert arrangement 36-13 36-14 36-15 service rating n, p, q = e; bal. = a d m = d; bal. = a number of contacts 2 15 5 5 6 35 contact size 12 16 8 12 16 16 contact legend 16 12 8 4 0 100 rotation of 36-10 110 rotation of 36-10 a b c d e f g h i j k l m n o p r s t u v wx y z ab c d e f g h j k m n p r t s u v x y z w a b c d e f g h i j k l m n o p r s t u v w x y z a b c d e fg h j k m n p r t u v w s x y z a b c d e f g h i j k l m n o p r s t u v w x y z a b c d e f ab cd e fg hjk lmn opqr stu v wx y z a b c de fg hj k mn p r t u v w s x yz q a b c d e f g h j k l m n p q rs a b c d e f g h j k l m n i p q a b c d e f g h j k l m n p q r s t u v w x y z a b c d e f g h j k m 100? ab cd e fg hjk lmn opq rstu vwx y z a b c d e f g hj k m n pr tuv w s x yz q 110? ab cd efg hj klmn opqr stu vwx y z a b c de f g hj k mnp r tu vw s x yz q
29 f ront face of pin insert or rear face of socket insert illustrated qwl contact arrangements insert arrangement 36-16 36-17 36-18 service rating a a a number of contacts 7 40 7 40 1 2 14 14 contact size 12 16 12 16 4 8 12 16 insert arrangement 36-20 36-52 40-1 service rating a a d number of contacts 2 2 30 52 6 24 contact size 8 12 16 16 12 16 insert arrangement 40-9 40-56 48-62 service rating a a d number of contacts 1 22 24 85 85 contact size 8 12 16 16 16 contact legend 16 12 8 4 0 110 rotation of 36-7 100 rotation of 36-9 100 rotation of 36-7 ab cd e fg hjk lmn p r stuvw xyz a b c d e fg h j k m a bc d e f hj k lm n p r s tuv wxy z ab c d fghi jkmn p r t u v w s x y z q aa ab ac ad ae af ah abc de fg hi jkl mno prs tu v wx yz ab c de ab c de f g h ij k l mn o pq r st u v w x yza b c d e f gh i j k l m n p r tu s o q abcd ef h j k lm nprstuvw xyzab c dfg hijkmnp r t uvw s xyz q aa ab ac ad ae af ah aj ak al am an ap ar as at au av aw ax ay az ba bb bv bc bd be bf bh bj bk bl bm bn bs bt bu bp br 1234 567891011 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 100? a b cde fg h i j k l m n o p rs t u v w x y z ab c d e f g h j k m np r t uv w s x y z 110? ab c d e f g h i j k l m n o p r s t u vwx y z a b c d e f g h j k m np r t u v w s x y z 100? a b c d e f g h i j k l m n o p r s t u v w x y z a b c d e f
30 a b c d e f h j k l m n special contact arrangements requirements for more complex circuits prompted amphenol to provide inserts not covered by the ms draw- ings. illustrated here and on the following pages are insert layouts which have from one contact (high tension) to the 104 contact insert in shell size 44. many of these special inserts are also available in alter- nate keyway arrangements. please contact amphenol, sidney, ny for additional information on special circuit application requirements. f ront face of pin insert or rear face of socket insert illustrated insert arrangement 14s-a7 16-59 20-26 20-51 20-57 20-58 service rating a a a a a a number of contacts 7 4 19 3* 7* 5 5 contact size 16 12 16 8 12 for #14 or 16 wire 12 16 insert arrangement 20-59 20-66 20-79 22-63 22-65 22-70 service rating a a h = d; bal. = a a h = d; bal. = a a number of contacts 3* 1 5 7* 1* 4 8 8* 8 5 contact size 8 for #10 or 12 wire 16 12 for #10 wire 16 12 for #16 wire 12 16 12 for #14 or 16 wire 12 16 insert arrangement 22-80 24-19 24-51 24-52 24-53 24-58 service rating a a a hi-volt a a number of contacts 3* 12 5* 1 5* 3 3 7 contact size 8 for #10 or 12 wire 16 b, e for an #10 or 12 wire 12 8 8 12 16 a, c, d for an #8 wire * solderless contact legend 16 12 8 4 0 a f e d c b g a b c a b c d e f h j k l a b c d eg f a b c a b c d e f a b c d e f g h a b c e f h j k l m n d a b c d e f h j k l m n p a b c a b c d e a b c d e a b c d e f h j k l m n p a b c d e f g h ab cd a b c d e f g h s r j t v p k l m u n
31 f ront face of pin insert or rear face of socket insert illustrated special contact arrangements insert arrangement 24-59 24-60 24-65 24-66 24-67 service rating a a a d inst. number of contacts 7 7 7* 11 4 7 19 contact size 12 16 8 for #10 or 12 wire 12 16 12 12 insert arrangement 24-71 24-75 24-79 24-80 24-84 service rating a a a inst. a number of contacts 2* 5* 5 2 5 23 1 18 contact size 8 8 for #10 or 12 wire 8 8 for #16 wire 8 16 12 12 (coax) rg-188/u or rg-174/u insert arrangement 24-96 24-aj 28-51 28-59 service rating inst. a a a number of contacts 28 25 12 7 10 contact size 16 16 12 12 16 * solderless contact legend 16 12 8 4 0 a b c d e f h j k l m n p r a b c d e f g a b c d e f h j k l m n p r s a b c d e f g a b c d e f g a b c d e f g a b c d e abcd efghj klmnpq r st u v wx z 90? a b c d e f g h j k l m n p r s t u v 90? a b c d e f g h j k l m n p r s t u v 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 a b c d e f h j k l m n ab c d e f h jk l m n pr s tu a b c d e f g h j k l m n p q r s t u v w x z y a
32 f ront face of pin insert or rear face of socket insert illustrated special contact arrangements insert arrangement 28-66 28-72 28-74 28-75 28-79 service rating a C a a a number of contacts 2 14 3 9* 4* 3* 9* 7* 7 9 contact size 8 12 4 (coax) rg-59a/u 16 8 8 for #10 wire 16 8 for #10 wire 8 16 or rg-62a/u (s, t, r) insert arrangement 28-82 28-84 28-ay 32-25 service rating d a a a number of contacts 2 4 9 4 5 25 contact size 8 12 8 4 16 12 insert arrangement 32-31 32-48 32-52 32-53 service rating a inst. d t, u = e; bal. = inst. number of contacts 31 48 6 2 5 37 contact size 16 16 12 0 12 16 * solderless contact legend 16 12 8 4 0 90 cw rotation of 32-15 a b c d e f h j k l m n p r s t a b c a b c d e f h j k l m n p r s t a b c d e f h j k l m n p r s t a b c d e f h j k l m n p r s t 12 3 45 6 a b c d e f g h i a bc de f g h j 13 12 11 10 9 8 7 6 5 4 3 2 1 23 19 22 21 20 15 18 17 16 14 24 25 90? a bc de f g h a b c d e f h j k l m n p r s t u v w x y z a b c d f g h i j k m n p r t u v w s q 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 a b c d e fh j k l m n p r st u v w x yz a bcd f g hi j k mn p q r s t uv w x y z aa bb cc
33 f ront face of pin insert or rear face of socket insert illustrated special contact arrangements insert arrangement 32-56 32-57 32-58 32-60 service rating a ** C a number of contacts 24 6 6 2 4 15 8 contact size 16 12 for #10 wire 12 0 (coax) rg-71/u 4 (coax) rg-161/u 16 8 (coax) rg-124/u or rg-179/u insert arrangement 32-62 32-64 32-68 service rating ** inst. a number of contacts 2 1 2 16 2 54 12 4 contact size 4 8 12 16 8 (coax) rg-124/u 16 16 4 (coax) rg-58c/u insert arrangement 32-73 32-75 32-76 32-79 service rating a 8, 9 = d a d number of contacts 46 2 7 19 4 1 contact size 16 12 8 (coax) rg-180b/u 12 4 8 ** consult amphenol, sidney, ny for service rating of power contacts. contact legend 16 12 8 4 0 a b c d e f g h i j k l m n o p r s t u v w x y z a b c d e a bc de f g h a b c d a b c d e f h j k l m n p r s t u v w x y z a ab cd ef gh j klmn o p r s t u v w i x a b c d e f g h j k l m n o p r s t u v w x yz a b c de f g h j k m n p r tu v w s x y z q aa ab ac ad ae af ag ab c d e fg h j klm n p q r 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 1 2 3 4 5 6 7 8 9 12 3 4 5 67 8 9 10 11 12 13 14 15 16 17 18 19 a b c d e
34 f ront face of pin insert or rear face of socket insert illustrated special contact arrangements insert arrangement 32-82 32-af 36-51 36-54 service rating a a d a number of contacts 4 12 55 2 2 8 31 contact size 4 16 16 0 4 8 16 insert arrangement 36-55 36-59 36-60 36-64 service rating a a ** C number of contacts 31 8 50 3 40 7 4 contact size 16 8 for #6 wire 16 12 for #10 wire 16 12 for #10 wire 0 (coax) rg-11/u, rg-12/u or rg-13/u insert arrangement 36-65 36-71 36-73 36-74 service rating C a C a number of contacts 4 3 50 7 43 1 contact size 0 (coax) rg-59/u, rg-62/u 12 16 4 (coax) rg-62b/u 16 8 (coax) rg-187/u or rg-71/u ** consult amphenol, sidney, ny for service rating of power contacts. contact legend 16 12 8 4 0 ab c d e fg h j klm n p q r ab cde fghj klm no pr st u vw xy za b c def g h j k n m pr t u v w s xy z q aa ab ac ad ae af ag ah a b c d a b c d e f h j k l m n p r s t u v w x y z a b c d f g h i j k m n p r t s q a b c d e f h j k l m n p r s t u v w x y z a b c d f g h i j k m n p r t s q a bc d ef h j k l mnprs t u vwx y zab c dfg hi jk mn p r t u vw s xy z q aa ab ac ad ae af ah aj a b c d e f g h i j k l m n o p r s t u v wx y z ab c d e f g h j k m n p r t s u v x y z w a b c d a b c d a bc d ef h j k l mnprs t u vwx y zab c dfg hi jk mn p r t u vw s xy z q aa ab ac ad ae af ah aj a b c d e f g 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91
35 f ront face of pin insert or rear face of socket insert illustrated special contact arrangements insert arrangement 36-75 36-76 36-77 36-78 service rating aada number of contacts 48 47 7 2 12 contact size 16 for #14 wire 16 4 16 8 insert arrangement 36-79 36-80 36-83 36-85 service rating a a C m = d; bal. = a number of contacts 20 20 7 35 contact size 12 12 for #10 wire 4 (coax) rg-58/u 16 for #12 wire insert arrangement 36-97 36-af 40-5 service rating c a a number of contacts 1 48 5 contact size 4/0 16 0 contact legend 16 12 8 4 0 4/0 12 34 5 67 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 12 3 45 67 8 910 1112 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 a b c d e f g 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 23 45 678 910 11 12 13 14 15 16 17 18 19 20 1 23 45 678 910 11 12 13 14 15 16 17 18 19 20 a b c d e f g a b c d e f g h j k l m n p q r s t u v w x y z a b c d f g h j k m e a b c d e f g h j k l m n o p q r s t u v w x y z a b c d e f g h j k m n p r t s q u v w x y z a b g c n
36 f ront face of pin insert or rear face of socket insert illustrated special contact arrangements insert arrangement 40-10 40-35 40-53 service rating a d a number of contacts 4 9 16 35 60 contact size 4 8 16 12 16 insert arrangement 40-57 40-61 40-62 service rating e a a number of contacts 4 1 3 55 60 contact size 0 8 12 16 16 insert arrangement 40-63 40-64 40-66 service rating a C C number of contacts 61 3 20 13 4 contact size 16 for #14 wire 12 16 8 (coax) rg-124/u 0 (coax) rg-63b/u contact legend 16 12 8 4 0 a b cd e h k g j f l q p n i m r s o v y z w u x b a c t 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 1 2 3 4 12 345 67 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 35 36 37 38 39 40 41 42 43 44 45 46 47 34 48 49 50 51 52 53 54 55 56 57 58 59 60 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 a b c d e f h j k l m n p r s t u v w x y z a b c d f g h i j k m n p q 1 2 3 4
37 f ront face of pin insert or rear face of socket insert illustrated special contact arrangements insert arrangement 40-67 40-68 40-70 service rating a a a number of contacts 1 10 21 61 contact size 16 4 (coax) rg-59/u 8 16 insert arrangement 40-72 40-73 40-74 service rating a a a number of contacts 1 10 61 1 1 4 contact size 16 4 (coax) rg-9b/u 16 12 4 (coax) rg-62/u 0 (coax) rg-9b/u or rg-214/u insert arrangement 40-75 40-80 40-81 service rating e a a number of contacts 1 4 1 10 62 contact size 12 0 16 4 16 for #14 wire contact legend 16 12 8 4 0 1 2345 678910 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 1 2 3 4 5 6 1 2 3 4 5 1234 567891011 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 a b c d e f g h j k l m n p r s t u v w x ab c d e fh j k l m ab c d e fh j k l m ab c d e fh j k l m
38 a b h gc d e f ab a b c d e f g h j k l m n 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 35 36 37 38 40 41 42 43 34 39 a b c d e f g h j k l m n p ab c f ront face of pin insert or rear face of socket insert illustrated special contact arrangements insert arrangement 40-82 40-85 40-86 40-87 service rating a a C d number of contacts 62 60 4 7 contact size 16 16 for #14 wire 0(coax) rg-115a/u 4 insert arrangement 40-ad 40-ag 40-ap 40-ar service rating a a e inst. number of contacts 4 4 38 2 7 3 3 contact size 8 0 12 4/0 12 4 0 insert arrangement 40-as 40-at 40-au 40-av service rating a a a d number of contacts 15 25 24 18 1 3 10 1 3 contact size 16 12 12 16 8 4 8 16 2/0 contact legend 16 12 8 4 0 2/0 4/0 1234 567891011 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 1 2 3 4 1 2 3 4 5 6 7 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38
39 f ront face of pin insert or rear face of socket insert illustrated special contact arrangements insert arrangement 44-52 44-53 48-51 service rating a a a number of contacts 104 18 18 42 10 4 contact size 16 16 8 (coax) rg-124/u 16 8 0 (coax) rg-41/u insert arrangement 48-52 48-53 service rating a d number of contacts 56 5 37 contact size 16 0 (coax) rg-41/u 12 contact legend 16 12 8 4 0 a b c d e f h j k l m n p r s t u v w x y z a b c d f g h i j k m n p q 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 a b c d 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 a b c d e abcd efgh j klmnpr st uvwx z a b c d ef gh j km npr s ab cdefh jk lmnp rstu vwxyz a b c d f g hi j kmn p rtuvw sx y z q ba bb bc bd be bf bh bj bk bl bm bn bp br bs bt bu bv bw bx by bz ca cb cc cd ce cf ch cj ck cl cm cn cp cr cs aa ab ac ad ae af ah aj ak al am an ap ar as at au av aw ax ay az
40 f ront face of pin insert or rear face of socket insert illustrated special contact arrangements insert arrangement 48-54 48-55 service rating a a number of contacts 42 10 4 68 2 2 6 contact size 16 8 0 (coax) rg-59/u 16 12 8 4 insert arrangement 48-57 48-60 service rating a a number of contacts 42 10 4 42 10 4 contact size 16 8 0 16 8 0 (coax) rg-214/u contact legend 16 12 8 4 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 a b c d 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 a b c d 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 a b c d
41 qwl C accessories cabling information the amphenol ? qwl series of electrical connectors has been designed with the problems of multi-conductor cable users in mind. two of these problems, namely water proofing and strain relief, are solved by the radial inward compression of an internal neoprene gland in the various cable accessories shown on the following pages. for additional strain relief beyond that provided by the gland, both cable grips and bar clamps are available. since the glands close down from .094 to .145 (depending on shell size), the optimum condition for cable users is to select a gland with an i.d. only slightly larger than the maximum o.d. of the cable. the inside diameter of the accessory housing determines the maxi- mum diameter of the cable as shown in the tabulation below. smaller sizes than those shown in each shell size can be accommodated by smaller compression glands. different cable manufacturers use different constructions and cable lays in manufacturing multi-conductor cable. the specific cabling manufacturing specification should be known by the customer in detail in order to properly figure each qwl application. this knowledge can save many individual wire crossovers in any given run of cable. crossovers add materially to the cable diameter without a cable accessory. in those cases where diameter buildup is impossible to avoid, special cable accessories with longer barrels are available. how to order information is covered in detail on pages 4 and 5. in selecting the base number below, care should be used, as some of the cable accessories are provided with protection cap attachment rings, while others are provided with the kellems strain relief grip as shown. if a type or cable accommodation size is not found herein that fulfills your application, please contact amphenol, sidney, ny. all dimensions for reference only. shell size qwl connector accessory thd. approx. work length (internal) minimum housing inner diameter maximum cable outer diameter short long 10 .500-28 .250 .359 .359 12 .625-24 .375 .484 .484 14 .750-20 .401 .609 .609 16 .875-20 .500 .734 .734 18 1.000-20 1.120 .859 .859 20 1.125-18 1.370 .984 .984 22 1.250-18 1.370 1.109 1.109 24 1.375-18 1.370 1.234 1.234 28 1.625-18 1.370 5.000 1.427 1.427 32 1.875-16 1.370 6.000 1.708 1.708 36 2.062-16 1.370 5.000 1.895 1.895 40 2.312-16 1.370 6.000 2.130 2.130 44 2.625-16 2.375 2.375 48 2.875-16 2.218 6.000 2.630 2.630
42 10-101332 short barrel with grip 10-101333 short barrel without grip 10-130380 short barrel length with attachment ring & strain relief bars 10-101335 short barrel with attachment ring 10-101335 short barrel with attachment ring qwl C cable accessories 10-101334 short barrel with grip & attachment ring 10-113637 long barrel with attachment ring and grip
43 type i straight type ii step down type iii step up h b d left hand gc a f e section a-a j a h b d left hand g f c e j h b d left hand gc a f e section a-a j a qwl C accessories 10-130380 cable sealing adapter (with clamp bars)
44 qwl C accessories 10-130380 cable sealing adapter (with clamp bars) all dimensions are for reference only. *for complete order number see pages 4 and 5. part number* used with shell size cable range b +.000 C.010 c +.010 C.000 d thread class 2b-lh e free max f +.010 C.020 g dia. +.010 C.020 h max. j max. type max. dia. min. dia. 10-130380-141 14s .460 .366 .750 .812 .750-20unef 1.125 1.782 .938 3.229 1.062 i 10-130380-142 14s .438 .344 .875 .938 .750-20unef 1.125 2.126 .938 3.573 1.125 iii 10-130380-143 14s .375 .306 .875 .938 .750-20unef 1.125 2.126 .938 3.573 1.125 iii 10-130380-161 16s .530 .436 1.000 1.062 .875-20unef 1.250 2.282 1.062 3.854 1.375 iii 10-130380-162 16s .605 .511 1.000 1.062 .875-20unef 1.250 2.282 1.062 3.854 1.375 iii 10-130380-171 16 .500 .406 .875 .938 .875-20unef 1.125 2.215 1.062 3.834 1.125 i 10-130380-181 18 .828 .715 1.188 1.250 1.000-20unef 1.250 3.032 1.188 4.776 1.688 iii 10-130380-182 18 .699 .605 1.062 1.125 1.000-20unef 1.250 2.933 1.188 4.677 1.562 iii 10-130380-183 18 .500 .406 .875 1.094 1.000-20unef 1.125 2.485 1.188 4.104 1.125 ii 10-130380-184 18 .562 .449 1.188 1.250 1.000-20unef 1.250 3.032 1.188 4.776 1.688 iii 10-130380-185 18 .750 .637 1.312 1.000 1.000-20unef 1.250 3.063 1.188 4.607 1.812 iii 10-130380-186 18 .530 .436 1.000 1.062 1.000-20unef 1.250 2.621 1.188 4.365 1.375 i 10-130380-201 20 .625 .531 1.062 1.125 1.125-18unef 1.250 2.933 1.312 4.677 1.562 i 10-130380-202 20 .605 .511 1.000 1.125 1.125-18unef 1.250 2.631 1.312 4.365 1.375 ii 10-130380-203 20 .628 .715 1.188 1.125 1.125-18unef 1.250 2.996 1.312 4.740 1.688 iii 10-130380-204 20 .720 .626 1.062 1.125 1.125-18unef 1.250 2.933 1.312 4.677 1.562 i 10-130380-205 20 .900 .787 1.312 1.250 1.125-18unef 1.250 3.062 1.312 4.807 1.812 iii 10-130380-206 20 .625 .531 1.062 1.125 1.125-18unef 1.250 2.933 1.312 4.677 1.562 i 10-130380-207 20 .750 .637 1.312 1.250 1.125-18unef 1.250 3.063 1.312 4.807 1.812 iii 10-130380-221 22 .790 .696 1.062 1.250 1.250-18unef 1.250 2.933 1.438 4.677 1.562 ii 10-130380-222 22 .720 .626 1.062 1.250 1.250-18unef 1.250 2.933 1.438 4.677 1.562 ii 10-130380-223 22 1.130 1.005 1.780 1.375 1.250-18unef 1.500 3.266 1.438 5.250 2.469 iii 10-130380-224 22 .680 .567 1.312 1.375 1.250-18unef 1.250 3.059 1.438 4.803 1.812 iii 10-130380-242 24 .900 .787 1.312 1.375 1.375-18unef 1.250 3.059 1.562 4.803 1.812 i 10-130380-243 24 1.180 1.055 1.780 1.812 1.375-18unef 1.500 3.204 1.562 5.198 2.469 iii 10-130380-244 24 .680 .567 1.312 1.375 1.375-18unef 1.250 3.059 1.562 4.803 1.812 i 10-130380-245 24 .630 .517 1.312 1.375 1.375-18unef 1.250 3.059 1.562 4.803 1.812 i 10-130380-246 24 1.000 .875 1.546 1.625 1.375-18unef 1.500 3.121 1.562 5.115 2.125 iii 10-130380-247 24 .805 .692 1.312 1.375 1.375-18unef 1.250 3.059 1.562 4.803 1.812 i 10-130380-281 28 1.310 1.185 1.780 1.875 1.625-18unef 1.500 3.184 1.812 5.178 2.469 iii 10-130380-282 28 .970 .857 1.312 1.625 1.625-18unef 1.250 3.059 1.812 4.803 1.812 ii 10-130380-283 28 .880 .755 1.546 1.625 1.625-18unef 1.500 3.121 1.812 5.115 2.125 i 10-130380-284 28 1.427 1.320 2.000 1.875 1.625-18unef 1.500 3.184 1.812 5.178 2.625 iii 10-130380-321 32 .970 .875 1.312 1.875 1.875-16un 1.250 3.059 2.062 4.803 1.812 ii 10-130380-322 32 1.230 1.105 1.780 1.875 1.875-16un 1.500 3.184 2.062 5.178 2.469 i 10-130380-323 32 1.328 1.240 1.780 1.875 1.875-16un 1.500 3.184 2.062 5.178 2.469 i 10-130380-324 32 .750 .637 1.312 1.875 1.875-16un 1.250 3.059 2.062 4.803 1.812 ii 10-130380-325 32 1.055 .958 1.546 1.875 1.875-16un 1.500 3.121 2.062 5.115 2.125 ii 10-130380-326 32 1.375 1.250 2.000 2.062 1.875-16un 1.500 3.246 2.062 5.240 2.625 iii 10-130380-361 36 1.310 1.185 1.780 2.062 2.0625-16un 1.500 3.184 2.312 5.178 2.469 ii 10-130380-362 36 1.900 1.775 2.438 2.312 2.0625-16un 1.625 3.500 2.312 5.619 3.171 iii 10-130380-363 36 1.530 1.406 2.000 2.062 2.0625-16un 1.500 3.246 2.312 5.240 2.625 i 10-130380-364 36 1.445 1.320 2.000 2.062 2.0625-16un 1.500 3.246 2.312 5.240 2.625 i 10-130380-365 36 .805 .692 1.312 2.062 2.0625-16un 1.250 3.059 2.312 4.803 1.812 ii 10-130380-366 36 .603 .511 1.000 2.000 2.0625-16un 1.250 2.875 2.312 4.619 1.375 ii 10-130380-367 36 1.000 .875 1.546 2.062 2.0625-16un 1.500 3.121 2.312 5.115 2.125 ii 10-130380-401 40 1.730 1.605 2.438 2.500 2.3125-16un 1.625 3.469 2.562 5.588 3.171 iii 10-130380-402 40 1.310 1.185 1.780 2.312 2.3125-16un 1.500 3.184 2.562 5.178 2.469 ii 10-130380-403 40 1.180 1.055 1.780 2.312 2.3125-16un 1.500 3.184 2.562 5.178 2.469 ii 10-130380-404 40 1.109 .984 1.546 2.312 2.3125-16un 1.500 3.121 2.562 5.115 2.125 ii 10-130380-441 44 1.900 1.775 2.438 2.750 2.625-16un 1.625 4.281 2.875 6.588 3.171 ii
45 qwl C accessories 10-10133x cable sealing adapter type i straight type ii step down type iii step up *wire grip dimensions (k) apply to 10-101332 and 10-101334 assemblies only. h k* optional b d left hand g c a f e section a-a a h b d left hand g f c e k* optional b d left hand gc a f section a-a a h e k* optional
46 qwl C accessories 10-10133x cable sealing adapter all dimensions are for reference only. *for complete order number see pages 4 and 5. part number* used with shell size cable range b +.000 C.010 c +.010 C.000 d thread class 2b-lh e free max. f +.010 C.020 g dia. +.010 C.020 h .045 k free approx. type max. dia. min. dia. 10-10133x-121 12s .281 .219 .750 .812 .6250-24nef .500 1.938 .812 2.750 2.844 iii 10-10133x-122 12s .500 .406 1.062 1.000 .6250-24nef .562 2.875 .812 3.750 4.688 iii 10-10133x-123 12s .405 .316 1.000 .812 .6250-24nef .562 2.548 .812 3.422 3.688 iii 10-10133x-141 14s .337 .281 .750 .812 .7500-20unef .500 1.782 .938 2.594 3.344 i 10-10133x-142 14s .222 .160 .625 .812 .7500-20unef .562 1.782 .938 2.532 2.406 ii 10-10133x-143 14s .281 .219 .750 .812 .7500-20unef .500 1.782 .938 2.594 2.844 i 10-10133x-144 14s .530 .441 1.000 .812 .7500-20unef .562 2.719 .938 3.594 4.688 iii 10-10133x-145 14s .463 .406 .875 .938 .7500-20unef .500 2.126 .938 2.938 4.344 iii 10-10133x-146 14s .405 .316 1.000 .812 .7500-20unef .562 2.719 .938 3.594 3.688 iii 10-10133x-151 14 .405 .316 1.000 .812 .7500-20unef .562 2.719 .938 3.765 3.688 iii 10-10133x-161 16s .463 .406 .875 .938 .8750-20unef .500 1.844 1.062 2.656 4.344 i 10-10133x-162 16s .589 .511 1.000 1.062 .8750-20unef .562 2.282 1.062 3.156 5.188 iii 10-10133x-163 16s .625 .580 1.062 1.125 .8750-20unef .562 2.933 1.062 3.807 6.188 iii 10-10133x-164 16s .405 .316 1.000 1.062 .8750-20unef .562 2.282 1.062 3.156 3.688 iii 10-10133x-165 16s .530 .441 1.000 1.062 .8750-20unef .562 2.282 1.062 3.156 4.688 iii 10-10133x-166 16s .699 .605 1.062 1.125 .8750-20unef .562 2.933 1.062 3.807 6.188 iii 10-10133x-167 16s .281 .219 .750 .938 .8750-20unef .500 1.844 1.062 2.656 2.844 ii 10-10133x-171 16 .589 .511 1.000 1.062 .8750-20unef .562 2.621 1.062 3.667 5.188 iii 10-10133x-172 16 .438 .400 .875 .938 .8750-20unef .500 2.215 1.062 3.199 4.344 i 10-10133x-173 16 .625 .580 1.062 1.125 .8750-20unef .562 2.933 1.062 3.979 6.188 iii 10-10133x-174 16 .530 .441 1.000 1.062 .8750-20unef .562 2.621 1.062 3.667 4.688 iii 10-10133x-175 16 .405 .316 1.000 1.062 .8750-20unef .562 2.621 1.062 3.667 3.688 iii 10-10133x-181 18 .589 .511 1.000 1.062 1.0000-20unef .562 2.621 1.188 3.667 5.188 i 10-10133x-182 18 .625 .580 1.062 1.125 1.0000-20unef .562 2.933 1.188 3.979 6.188 iii 10-10133x-183 18 .530 .441 1.000 1.062 1.0000-20unef .562 2.621 1.188 3.667 4.688 i 10-10133x-184 18 .699 .605 1.062 1.125 1.0000-20unef .562 2.933 1.188 3.979 6.188 iii 10-10133x-185 18 .405 .316 1.000 1.062 1.0000-20unef .562 2.621 1.188 3.667 3.688 i 10-10133x-186 18 .455 .361 1.062 1.125 1.0000-20unef .562 2.933 1.188 3.979 4.188 iii 10-10133x-187 18 .750 .637 1.250 1.000 1.0000-20unef .562 3.063 1.188 4.109 6.688 iii 10-10133x-188 18 .172 .078 .750 .938 1.0000-20unef .500 2.407 1.188 3.391 2.844 ii 10-10133x-190 18 .805 .692 1.250 1.000 1.0000-20unef .562 3.063 1.188 4.109 6.688 iii 10-10133x-201 20 .625 .580 1.062 1.125 1.1250-18nef .562 2.933 1.312 3.979 6.188 i 10-10133x-202 20 .699 .605 1.062 1.125 1.1250-18nef .562 2.933 1.312 3.979 6.188 i 10-10133x-203 20 .500 .406 1.062 1.125 1.1250-18nef .562 2.933 1.312 3.979 4.688 i 10-10133x-204 20 .337 .281 .750 1.125 1.1250-18nef .500 2.438 1.312 3.422 3.344 ii 10-10133x-205 20 .828 .715 1.125 1.250 1.1250-18nef .547 2.996 1.312 4.042 6.688 iii 10-10133x-206 20 .375 .312 .875 1.125 1.1250-18nef .500 2.469 1.312 3.453 3.844 ii 10-10133x-207 20 .281 .219 .750 1.125 1.1250-18nef .500 2.438 1.312 3.422 2.844 ii 10-10133x-208 20 .455 .361 1.062 1.125 1.1250-18nef .562 2.933 1.312 3.979 4.188 i 10-10133x-209 20 .589 .511 1.000 1.125 1.1250-18nef .562 2.621 1.312 3.667 5.188 ii 10-10133x-210 20 .530 .441 1.000 1.125 1.1250-18nef .562 2.621 1.312 3.667 4.688 ii 10-10133x-211 20 .900 .791 1.250 1.250 1.1250-18nef .562 3.063 1.312 4.109 7.188 iii
47 qwl C accessories 10-10133x cable sealing adapter all dimensions are for reference only. *for complete order number see pages 4 and 5. part number* used with shell size cable range b +.000 C.010 c +.000 C.010 d thread class 2b-lh e free .010 f +.010 C.020 g dia. +.010 C.020 h .045 k free approx. type max. dia. min. dia. 10-10133x-221 22 .699 .605 1.062 1.250 1.2500-18nef .562 2.933 1.438 3.979 6.188 ii 10-10133x-222 22 .750 .637 1.250 1.375 1.2500-18nef .562 3.059 1.438 4.105 6.688 iii 10-10133x-223 22 .445 .367 1.062 1.250 1.2500-18nef .562 2.933 1.438 3.979 4.188 ii 10-10133x-224 22 1.000 .875 1.500 1.375 1.2500-18nef .562 3.121 1.438 4.167 7.188 iii 10-10133x-225 22 .828 .715 1.125 1.250 1.2500-18nef .594 2.996 1.438 4.072 6.688 i 10-10133x-226 22 .900 .791 1.250 1.375 1.2500-18nef .562 3.059 1.438 4.105 7.188 iii 10-10133x-227 22 .562 .453 1.125 1.250 1.2500-18nef .594 2.996 1.438 4.074 5.188 i 10-10133x-228 22 1.101 .984 1.500 1.375 1.2500-18nef .562 3.121 1.438 4.167 7.688 iii 10-10133x-229 22 .589 .511 1.000 1.250 1.2500-18nef .562 2.750 1.438 3.796 5.188 ii 10-10133x-231 22 1.055 .958 1.500 1.375 1.2500-18nef .562 3.121 1.438 4.167 7.688 iii 10-10133x-241 24 1.000 .875 1.500 1.625 1.3750-18nef .562 3.121 1.562 4.167 7.188 iii 10-10133x-242 24 .562 .453 1.125 1.406 1.3750-18nef .562 2.996 1.562 4.042 5.188 ii 10-10133x-243 24 .750 .637 1.250 1.375 1.3750-18nef .562 3.059 1.562 4.105 6.688 i 10-10133x-244 24 .900 .791 1.250 1.375 1.3750-18nef .562 3.059 1.562 4.105 7.188 i 10-10133x-245 24 1.101 .984 1.500 1.625 1.3750-18nef .562 3.121 1.562 4.167 7.688 iii 10-10133x-246 24 .405 .316 1.000 1.375 1.3750-18nef .562 2.750 1.562 3.796 3.688 ii 10-10133x-247 24 .828 .715 1.125 1.406 1.3750-18nef .562 2.996 1.562 4.042 6.688 ii 10-10133x-248 24 .805 .692 1.250 1.375 1.3750-18nef .562 3.059 1.562 4.105 6.688 i 10-10133x-249 24 1.130 1.005 1.750 1.812 1.3750-18nef .562 3.204 1.562 4.250 7.188 iii 10-10133x-281 28 1.055 .958 1.500 1.625 1.6250-18nef .562 3.121 1.812 4.167 7.688 i 10-10133x-282 28 .900 .791 1.250 1.625 1.6250-18nef .562 3.059 1.812 4.105 7.188 ii 10-10133x-283 28 1.000 .875 1.500 1.625 1.6250-18nef .562 3.121 1.812 4.167 7.188 i 10-10133x-284 28 .630 .535 1.250 1.625 1.6250-18nef .562 3.059 1.812 4.105 5.688 ii 10-10133x-285 28 .750 .637 1.250 1.625 1.6250-18nef .562 3.059 1.812 4.105 6.688 ii 10-10133x-286 28 1.180 1.099 1.750 1.875 1.6250-18nef .562 3.184 1.812 4.230 8.188 iii 10-10133x-287 28 1.101 .984 1.500 1.625 1.6250-18nef .562 3.121 1.812 4.167 7.688 i 10-10133x-288 28 1.310 1.200 1.750 1.875 1.6250-18nef .562 3.184 1.812 4.230 8.688 iii 10-10133x-289 28 1.230 1.105 1.750 1.875 1.6250-18nef .562 3.184 1.812 4.230 8.188 iii 10-10133x-290 28 .880 .755 1.500 1.625 1.6250-18nef .562 3.121 1.812 4.167 6.688 i 10-10133x-291 28 .957 .857 1.250 1.625 1.6250-18nef .547 3.059 1.812 4.090 7.188 ii 10-10133x-292 28 .828 .715 1.125 1.625 1.6250-18nef .562 2.954 1.812 4.000 6.688 ii 10-10133x-293 28 1.375 1.250 2.000 1.875 1.6250-18nef .562 3.184 1.812 4.230 9.688 iii 10-10133x-294 28 1.445 1.320 2.000 1.875 1.6250-18nef .562 3.184 1.812 4.230 9.688 iii 10-10133x-295 28 .805 .692 1.250 1.625 1.6250-18nef .562 3.059 1.812 4.105 6.688 ii 10-10133x-321 32 .880 .755 1.500 1.875 1.8750-16n .562 3.121 2.062 4.167 6.688 ii 10-10133x-322 32 1.101 .984 1.500 1.875 1.8750-16n .562 3.121 2.062 4.167 7.688 ii 10-10133x-323 32 .750 .637 1.250 1.875 1.8750-16n .562 3.059 2.062 4.105 6.688 ii 10-10133x-324 32 1.445 1.320 2.000 2.062 1.8750-16n .672 3.246 2.062 4.292 9.688 iii 10-10133x-325 32 1.180 1.099 1.750 1.875 1.8750-16n .562 3.184 2.062 4.230 8.188 i 10-10133x-326 32 .375 .312 .875 1.875 1.8750-16n .500 2.766 2.062 3.750 3.844 ii 10-10133x-327 32 .957 .857 1.250 1.875 1.8750-16n .562 3.059 2.062 4.105 7.188 ii 10-10133x-328 32 1.230 1.105 1.750 1.875 1.8750-16n .562 3.184 2.062 4.230 8.188 i 10-10133x-329 32 1.530 1.406 2.000 2.062 1.8750-16n .562 3.246 2.062 4.292 10.688 iii 10-10133x-330 32 1.000 .875 1.500 1.875 1.8750-16n .562 3.121 2.062 4.167 7.188 ii 10-10133x-331 32 1.375 1.250 2.000 2.062 1.8750-16n .562 3.246 2.062 4.292 9.688 iii 10-10133x-332 32 1.310 1.200 1.750 1.875 1.8750-16n .562 3.184 2.062 4.230 8.688 i 10-10133x-333 32 .580 x .825 (oval) 1.500 1.875 1.8750-16n .562 3.121 2.062 4.167 6.688 ii 10-10133x-334 32 .500 x .705 (oval) 1.500 1.875 1.8750-16n .562 3.121 2.062 4.167 6.688 ii
48 qwl C accessories 10-10133x cable sealing adapter all dimensions are for reference only. *for complete order number see pages 4 and 5. part number* used with shell size cable range b +.000 C.010 c +.000 C.010 d thread class 2b-lh e free .035 f +.010 C.020 g dia. +.010 C.020 h .045 k free approx. type max. dia. min. dia. 10-10133x-335 32 .530 .441 1.000 1.625 1.8750-16n .562 2.875 2.062 3.921 4.688 ii 10-10133x-336 32 .680 .567 1.250 1.875 1.8750-16n .562 3.059 2.062 4.105 6.688 ii 10-10133x-337 32 .463 .406 .875 1.875 1.8750-16n .500 2.766 2.062 3.750 4.344 ii 10-10133x-361 36 1.055 .958 1.500 2.062 2.0625-16n .562 3.121 2.312 4.167 7.688 ii 10-10133x-362 36 1.445 1.320 2.000 2.062 2.0625-16n .562 3.246 2.312 4.292 9.688 i 10-10133x-363 36 1.530 1.406 2.000 2.062 2.0625-16n .562 3.246 2.312 4.292 10.688 i 10-10133x-364 36 1.230 1.105 1.750 2.062 2.0625-16n .562 3.184 2.312 4.230 8.188 ii 10-10133x-365 36 .750 .637 1.250 2.062 2.0625-16n .562 3.059 2.312 4.105 6.688 ii 10-10133x-366 36 .880 .755 1.500 2.062 2.0625-16n .562 3.121 2.312 4.167 6.688 ii 10-10133x-367 36 1.656 1.531 2.250 2.312 2.0625-16n .562 3.308 2.312 4.354 12.688 iii 10-10133x-368 36 1.101 .984 1.500 2.062 2.0625-16n .562 3.121 2.312 4.167 7.688 ii 10-10133x-369 36 .957 .857 1.250 2.062 2.0625-16n .672 3.059 2.312 4.090 7.188 ii 10-10133x-370 36 1.900 1.775 2.438 2.312 2.0625-16n .500 3.500 2.312 4.656 13.688 iii 10-10133x-371 36 .375 .312 .875 2.062 2.0625-16n .500 2.813 2.312 3.797 3.844 ii 10-10133x-372 36 1.825 1.700 2.438 2.312 2.0625-16n .672 3.500 2.312 4.656 13.688 iii 10-10133x-373 36 1.375 1.250 2.000 2.062 2.0625-16n .562 3.246 2.312 4.292 9.688 i 10-10133x-374 36 1.562 1.437 2.250 2.312 2.0625-16n .562 3.308 2.312 4.354 11.188 iii 10-10133x-375 36 1.730 1.605 2.438 2.312 2.0625-16n .672 3.500 2.312 4.656 13.688 iii 10-10133x-376 36 .530 .441 1.000 1.875 2.0625-16n .562 2.875 2.312 3.921 4.688 ii 10-10133x-377 36 1.130 1.005 1.750 2.062 2.0625-16n .562 3.184 2.312 4.230 7.188 ii 10-10133x-378 36 1.180 1.055 1.750 2.062 2.0625-16n .562 3.184 2.312 4.230 8.188 ii 10-10133x-379 36 1.595 1.470 2.250 2.312 2.0625-16n .562 3.308 2.312 4.354 11.688 iii 10-10133x-401 40 1.310 1.200 1.750 2.312 2.3125-16n .562 3.184 2.562 4.230 8.688 ii 10-10133x-402 40 1.656 1.531 2.250 2.312 2.3125-16n .562 3.308 2.562 4.354 12.688 i 10-10133x-403 40 1.101 .984 1.500 2.312 2.3125-16n .438 3.121 2.562 4.167 7.688 ii 10-10133x-404 40 1.562 1.437 2.250 2.312 2.3125-16n .562 3.308 2.562 4.354 11.188 i 10-10133x-405 40 1.375 1.250 2.000 2.312 2.3125-16n .562 3.246 2.562 4.292 9.688 ii 10-10133x-406 40 1.180 1.099 1.750 2.312 2.3125-16n .562 3.184 2.562 4.230 8.188 ii 10-10133x-407 40 1.900 1.775 2.438 2.500 2.3125-16n .672 3.469 2.562 4.625 13.688 iii 10-10133x-408 40 1.730 1.605 2.438 2.500 2.3125-16n .672 3.469 2.562 4.625 13.688 iii 10-10133x-409 40 1.825 1.700 2.438 2.500 2.3125-16n .672 3.469 2.562 4.625 13.688 iii 10-10133x-410 40 1.984 1.859 2.438 2.500 2.3125-16n .672 3.469 2.562 4.625 13.688 iii 10-10133x-411 40 1.445 1.320 2.000 2.312 2.3125-16n .562 3.246 2.562 4.292 9.688 ii 10-10133x-412 40 2.062 1.937 2.750 2.500 2.3125-16n .672 3.500 2.562 4.656 14.188 iii 10-10133x-413 40 2.100 1.955 2.750 2.500 2.3125-16n .672 3.500 2.562 4.656 14.188 iii 10-10133x-414 40 2.145 2.000 2.750 2.500 2.3125-16n .672 3.500 2.562 4.656 14.188 iii 10-10133x-415 40 .957 .857 1.250 2.125 2.3125-16n .562 3.063 2.562 4.109 7.188 ii 10-10133x-416 40 1.230 1.103 1.750 2.312 2.3125-16n .562 3.184 2.562 4.230 8.188 ii 10-10133x-417 40 1.055 .958 1.500 2.312 2.3125-16n .562 3.121 2.562 4.167 7.688 ii 10-10133x-418 40 .630 .567 1.250 2.250 2.3125-16un .562 3.063 2.562 4.109 6.688 ii 10-10133x-441 44 2.170 2.025 2.750 2.625 2.6250-16un .672 3.609 2.875 4.953 17.188 iii 10-10133x-442 44 2.145 2.000 2.750 2.625 2.6250-16un .672 3.547 2.875 4.891 14.188 iii 10-10133x-443 44 2.250 2.105 2.750 2.625 2.6250-16un .672 3.609 2.875 4.953 17.188 iii 10-10133x-445 44 1.130 1.005 1.750 2.625 2.6250-16un .562 3.969 2.875 5.203 7.188 ii 10-10133x-446 44 1.109 .984 1.500 2.500 2.6250-16un .562 3.905 2.875 5.140 7.688 ii 10-10133x-449 44 1.445 1.320 2.000 2.562 2.6250-16un .562 4.031 2.875 5.265 9.688 ii 10-10133x-481 48 1.900 1.775 2.438 2.812 2.8750-16n .562 3.203 3.125 4.547 13.688 ii 10-10133x-482 48 2.000 1.867 2.750 2.969 2.8750-16n .672 4.281 3.125 5.625 14.188 ii 10-10133x-483 48 2.250 2.105 2.750 2.750 2.8750-16n .672 4.406 3.125 5.750 17.188 i 10-10133x-484 48 2.170 2.025 2.750 2.750 2.8750-16n .672 4.406 3.125 5.750 17.188 i
49 qwl C accessories 10-113637 cable sealing adapter (with woven strain relief) type i straight type ii step down type iii step up h k b d left hand g c a f e section a-a a h d left hand g f e k* optional b c b d left hand g c a f section a-a a h e k* optional
50 qwl C accessories 10-113637 cable sealing adapter (with woven strain relief) all dimensions are for reference only. *for complete order number see pages 4 and 5. part number* used with shell size cable range b +.000 C.010 c +.010 C.000 d thread class 2b-lh e free .035 f +.010 C.020 g dia. +.010 C.020 h .045 k free approx. type max. dia. min. dia. 10-113637-141 14s .337 .281 .750 .750 .7500-20unef .500 5.282 .938 6.094 3.344 i 10-113637-142 14s .405 .316 1.000 1.000 .7500-20unef .562 5.500 .938 6.374 3.688 iii 10-113637-143 14s .530 .441 1.000 1.000 .7500-20unef .562 5.500 .938 6.374 4.688 iii 10-113637-144 14s .463 .406 .875 .938 .7500-20unef .500 5.344 .938 6.156 4.344 iii 10-113637-171 16 .699 .605 1.062 1.125 .8750-20unef .562 5.563 1.062 6.609 6.188 iii 10-113637-172 16 .530 .441 1.000 1.000 .8750-20unef .562 5.500 1.062 6.546 4.688 iii 10-113637-181 18 .828 .715 1.125 1.250 1.0000-20unef .562 6.657 1.188 7.703 6.688 iii 10-113637-201 20 .750 .637 1.250 1.312 1.1250-18nef .562 6.000 1.312 7.046 6.688 iii 10-113637-202 20 .984 .875 1.500 1.625 1.1250-18nef .562 6.750 1.312 7.796 7.188 iii 10-113637-203 20 .900 .791 1.250 1.312 1.1250-18unef .562 6.000 1.312 7.046 7.188 iii 10-113637-221 22 .750 .637 1.250 1.312 1.2500-18nef .562 6.000 1.438 7.046 6.688 iii 10-113637-222 22 .699 .605 1.062 1.312 1.2500-18nef .562 5.063 1.438 6.109 6.188 ii 10-113637-223 22 1.055 .958 1.500 1.625 1.2500-18nef .562 6.750 1.438 7.796 7.688 iii 10-113637-224 22 1.828 .715 1.125 1.250 1.2500-18nef .562 5.625 1.438 6.671 6.688 i 10-113637-225 22 .589 .511 1.000 1.250 1.2500-18nef .562 5.500 1.438 6.546 5.188 ii 10-113637-241 24 .957 .857 1.250 1.375 1.3750-18nef .562 6.000 1.562 7.046 7.188 i 10-113637-242 24 .750 .637 1.250 1.375 1.3750-18nef .562 6.000 1.562 7.046 6.688 i 10-113637-243 24 1.101 .984 1.500 1.625 1.3750-18nef .562 6.750 1.562 7.796 7.688 iii 10-113637-244 24 1.000 .875 1.500 1.625 1.3750-18nef .562 6.750 1.562 7.796 7.188 iii 10-113637-245 24 1.180 1.055 1.750 1.812 1.3750-18nef .562 6.813 1.562 7.859 8.188 iii 10-113637-246 24 .805 .692 1.250 1.375 1.3750-18nef .562 6.000 1.562 7.046 6.688 i 10-113637-281 28 1.000 .875 1.500 1.562 1.6250-18nef .562 6.750 1.812 7.796 7.188 i 10-113637-282 28 1.900 1.775 2.438 2.438 1.6250-18nef .672 8.125 1.812 9.281 13.688 iii 10-113637-283 28 1.375 1.250 2.000 2.000 1.6250-18nef .562 6.875 1.812 7.921 9.688 iii 10-113637-284 28 .750 .637 1.250 1.562 1.6250-18nef .562 5.750 1.812 6.796 6.688 ii 10-113637-285 28 1.101 .984 1.500 1.562 1.6250-18nef .562 6.750 1.812 7.796 7.688 i 10-113637-286 28 1.130 1.005 1.750 1.875 1.6250-18nef .562 6.813 1.812 7.859 7.188 iii 10-113637-287 28 .900 .791 1.250 1.562 1.6250-18nef .562 5.750 1.812 6.796 7.188 ii 10-113637-288 28 1.427 1.320 2.000 2.000 1.6250-18nef .562 6.875 1.812 7.921 9.688 iii 10-113637-289 28 1.180 1.099 1.750 1.875 1.6250-18nef .562 6.812 1.812 7.858 8.188 iii 10-113637-290 28 1.055 .958 1.500 1.562 1.6250-18nef .562 6.750 1.812 7.796 7.688 i 10-113637-291 28 .957 .857 1.250 1.562 1.6250-18nef .562 5.750 1.812 6.796 7.188 ii 10-113637-292 28 1.310 1.200 1.750 1.875 1.6250-18nef .562 6.813 1.812 7.859 8.688 iii 10-113637-293 28 .530 .441 1.000 1.625 1.6250-18nef .562 6.500 1.812 7.546 4.688 ii 10-113637-294 28 1.230 1.105 1.750 1.875 1.6250-18nef .562 6.813 1.812 7.859 8.188 iii 10-113637-295 28 .630 .535 1.250 1.562 1.6250-18nef .562 5.750 1.812 6.796 5.688 ii
51 qwl C accessories 10-113637 cable sealing adapter (with woven strain relief) all dimensions are for reference only. *for complete order number see pages 4 and 5. part number* used with shell size cable range b +.000 C.010 c +.010 C.000 d thread class 2b-lh e free .035 f +.010 C.020 g dia. +.010 C.020 h .045 k free approx. type max. dia. min. dia. 10-113637-321 32 .828 .715 1.125 1.844 1.8750-16n .594 7.625 2.062 8.703 6.688 ii 10-113637-322 32 1.310 1.200 1.750 1.812 1.8750-16un .562 6.812 2.062 7.858 8.688 i 10-113637-323 32 1.130 1.005 1.750 1.812 1.8750-16un .562 6.812 2.062 7.858 7.188 i 10-113637-324 32 1.375 1.250 2.000 2.000 1.8750-16un .562 7.875 2.062 8.921 9.688 iii 10-113637-325 32 1.445 1.320 2.000 2.000 1.8750-16un .562 7.875 2.062 8.921 9.688 iii 10-113637-326 32 1.180 1.099 1.750 1.812 1.8750-16un .562 6.812 2.062 7.858 8.188 i 10-113637-327 32 1.656 1.531 2.250 2.250 1.8750-16un .562 7.141 2.062 8.187 12.688 iii 10-113637-328 32 .970 .857 1.250 1.844 1.8750-16un .562 6.688 2.062 7.734 7.188 ii 10-113637-361 36 1.375 1.250 2.000 2.000 2.0625-16n .562 6.875 2.312 7.921 9.688 i 10-113637-362 36 1.000 .875 1.500 2.000 2.0625-16n .562 6.750 2.312 7.796 7.188 ii 10-113637-363 36 1.920 x 1.140 oval 1.920 x 1.140 oval 2.438 2.438 2.0625-16n .672 8.125 2.312 9.281 13.688 iii 10-113637-364 36 1.230 1.105 1.750 2.000 2.0625-16n .562 6.813 2.312 7.859 8.188 ii 10-113637-365 36 1.562 1.437 2.250 2.250 2.0625-16n .562 6.938 2.312 7.984 11.188 iii 10-113637-366 36 1.656 1.531 2.250 2.250 2.0625-16n .562 6.938 2.312 7.984 11.188 iii 10-113637-367 36 1.445 1.320 2.000 2.000 2.0625-16n .562 6.875 2.312 7.921 9.688 i 10-113637-368 36 1.825 1.700 2.438 2.500 2.0625-16n .672 9.125 2.312 9.281 13.688 iii 10-113637-369 36 1.895 1.775 2.438 2.438 2.0625-16n .672 8.125 2.312 9.281 13.688 iii 10-113637-370 36 1.730 1.605 2.438 2.438 2.0625-16n .672 8.125 2.312 9.281 13.688 iii 10-113637-371 36 1.310 1.200 1.750 2.000 2.0625-16n .562 6.813 2.312 7.859 8.688 ii 10-113637-401 40 1.906 1.761 2.750 2.438 2.3125-16n .672 8.125 2.562 9.281 14.188 iii 10-113637-402 40 1.940 1.815 2.438 2.438 2.3125-16n .672 8.125 2.562 9.281 13.688 iii 10-113637-403 40 1.900 1.775 2.438 2.438 2.3125-16n .672 8.125 2.562 9.281 13.688 iii 10-113637-404 40 1.825 1.700 2.438 2.438 2.3125-16n .672 8.125 2.562 9.281 13.688 iii 10-113637-405 40 1.310 1.200 1.750 2.250 2.3125-16n .562 7.813 2.562 8.859 8.688 ii 10-113637-406 40 1.180 1.099 1.750 2.250 2.3125-16n .562 7.813 2.562 8.859 8.188 ii 10-113637-407 40 1.230 1.105 1.750 2.250 2.3125-16n .562 7.813 2.562 8.859 8.188 ii 10-113637-408 40 1.656 1.531 2.250 2.250 2.3125-16n .562 7.938 2.562 8.984 11.188 i 10-113637-410 40 2.145 2.000 2.750 2.438 2.3125-16n .672 8.125 2.562 9.281 14.188 iii 10-113637-411 40 1.984 1.859 2.438 2.438 2.3125-16n .672 8.125 2.562 9.281 13.688 iii 10-113637-412 40 1.940 1.815 2.438 2.438 2.3125-16n .672 11.125 2.562 12.281 13.688 iii 10-113637-413 40 1.984 1.859 2.438 2.438 2.3125-16n .672 11.125 2.562 12.281 13.688 iii 10-113637-414 40 2.100 1.955 2.750 2.625 2.3125-16n .672 12.000 2.562 13.156 14.188 iii 10-113637-415 40 1.562 1.437 2.250 2.250 2.3125-16n .562 7.938 2.562 8.984 11.188 i 10-113637-416 40 1.445 1.320 2.000 2.312 2.3125-16n .562 6.875 2.562 7.921 9.688 ii 10-113637-417 40 1.375 1.250 2.000 2.312 2.3125-16n .562 6.875 2.562 7.921 9.688 ii
52 qwl C accessories 10-113637 cable sealing adapter (with woven strain relief) all dimensions are for reference only. *for complete order number see pages 4 and 5. part number* used with shell size cable range b +.000 C.010 c +.010 C.000 d thread class 2b-lh e free .035 f +.010 C.020 g dia +.010 C.020 h .045 k free? approx. type max dia min dia 10-113637-441 44 2.100 1.955 2.750 2.750 2.6250-16un .672 8.125 2.875 9.469 14.188 iii 10-113637-442 44 2.250 2.105 2.750 2.875 2.6250-16un .672 8.188 2.875 9.531 17.188 iii 10-113637-443 44 2.000 1.867 2.750 2.750 2.6250-16un .672 8.125 2.875 9.469 14.188 iii 10-113637-444 44 1.500 1.375 2.250 2.500 2.6250-16un .562 7.938 2.875 9.171 11.188 ii 10-113637-445 44 1.730 1.605 2.438 2.750 2.6250-16un .672 8.125 2.875 9.469 13.688 ii 10-113637-446 44 .750 .637 1.250 2.625 2.6250-16un .562 6.688 2.875 7.921 6.688 ii 10-113637-447 44 1.825 1.700 2.438 2.750 2.6250-16un .672 8.125 2.875 9.469 13.688 ii 10-113637-448 44 2.145 2.000 2.750 2.750 2.6250-16un .672 8.125 2.875 9.469 14.188 iii 10-113637-449 44 2.170 2.025 2.750 2.875 2.6250-16un .672 8.188 2.875 9.532 17.188 iii 10-113637-450 44 1.375 1.250 2.000 2.625 2.6250-16un .562 7.875 2.875 9.109 9.688 ii 10-113637-481 48 2.250 2.105 2.750 2.750 2.8750-16n .672 8.188 3.125 9.532 14.688 i 10-113637-482 48 2.500 2.355 2.875 2.875 2.8750-16n .672 8.188 3.125 9.532 18.188 iii 10-113637-483 48 2.375 2.230 2.875 2.875 2.8750-16n .672 8.188 3.125 9.532 18.188 iii 10-113637-484 48 2.145 2.000 2.750 2.875 2.8750-16n .672 8.125 3.125 9.469 14.188 ii 10-113637-485 48 2.000 1.867 2.750 2.875 2.8750-16n .672 8.125 3.125 9.469 14.188 ii 10-113637-486 48 1.656 1.531 2.250 2.750 2.8750-16un .562 7.937 3.125 9.171 12.688 ii
53 qwl C accessories adapter, cable clamp 10-113196-xx adapter 10-749xx-( ) cable clamp this cable clamp is designed to be used with specific qwl insert arrangements. the locations, quantity, and sizes of holes in the clamp grommet must correspond to those in the connector for an effective moisture seal without wire crossing. contact amphenol, sidney, ny, for grommet avail- ability. example: 10-107618-4p must use 10-74918-4 clamp. v e l d a c f y w z
54 b dia 45 a dia c .135 +.030 C.025 ? qwl C accessories adapter, cable clamp, sealing plugs all dimensions for reference only. *for complete order number see page 5. clamp 10-749xx-( ) has a bright cadmium finish. an olive drab cadmium plate finish is ava ilable by order number 71-749xx-( ). to complete clamp order number, add connector insert arrangement number. shell size adapter part number* clamp part number* a thread class 2a c +.010 C.000 d dia. +.010 C.020 e dia. +.010 C.020 f .010 l .010 v thread class 2b-lh w min. thd. engage y max. z max. 10s 10-113196-10 10-74910-( ) .500-28unef .203 .922 .625 .562 1.234 .500-28unef .519 .807 .529 12s 10-113196-12 10-74912-( ) .625-24nef .328 .969 .750 .688 1.281 .625-24nef .519 .901 .524 12 10-113196-13 10-74913-( ) .625-24nef .328 .954 .750 .688 1.438 .625-24nef .519 .901 .524 14s 10-113196-14 10-74914-( ) .750-20unef .453 1.094 .875 .812 1.406 .750-20unef .519 1.026 .524 14 10-113196-15 10-74915-( ) .750-20unef .453 .954 .875 .812 1.438 .750-20unef .519 1.026 .524 16s 10-113196-16 10-74916-( ) .875-20unef .578 1.094 1.000 .938 1.406 .875-20unef .519 1.119 .524 16 10-113196-17 10-74917-( ) .875-20unef .578 1.016 1.000 .938 1.500 .875-20unef .519 1.119 .524 18 10-113196-18 10-74918-( ) 1.000-20unef .676 1.141 1.188 1.062 1.625 1.000-20unef .519 1.229 .556 20 10-113196-20 10-74920-( ) 1.1875-18nef .801 1.094 1.312 1.250 1.578 1.125-18nef .505 1.479 .666 22 10-113196-22 10-74922-( ) 1.1875-18nef .906 1.141 1.438 1.250 1.625 1.250-18nef .519 1.479 .666 24 10-113196-24 10-74924-( ) 1.4375-18nef 1.016 1.094 1.562 1.500 1.578 1.375-18nef .519 1.666 .666 28 10-113196-28 10-74928-( ) 1.4375-18nef 1.130 1.235 1.812 1.500 1.719 1.625-18nef .519 1.666 .666 32 10-113196-32 10-74932-( ) 1.7500-18ns 1.438 1.204 2.062 1.875 1.688 1.875-16n .519 2.135 .805 36 10-113196-36 10-74936-( ) 2.000-18ns 1.678 1.266 2.250 2.125 1.750 2.0625-16n .738 2.260 .805 40 10-113196-40 10-74940-( ) 2.2500-16un 1.914 1.266 2.500 2.375 1.750 2.3125-16n .738 2.510 .805 sealing plug ms27488-xx 10-405996-xx order no. contact size ms number wire size color code b .005 c .010 a dia. .010 10-405996-16 16 27488-16 20-16 blue .133 .564* .083 10-405996-12 12 27488-12 14-12 yellow .171 .564* .121 10-405996-8 8 27488-8 10-8 white .315 .470 .185 10-405996-4 4 27488-4 4-6 blue .415 .470 .310 10-405996-0 0 27488-0 0-2 yellow .605 1.000 .440 *.020 sealing plugs are used to fill unused holes in multi-holed grommet configurations
55 qwl C accessories adapter, cable clamp 10-113138-xx adapter m85049/2-( )c cable clamp v left hand e d l a b c f y m k a
56 qwl C accessories adapter, cable clamp, sleeve shell size adapter part number* clamp ms part number* a thread class 2a (plated) b min full thd c dia +.000 C.010 d .020 e dia +.010 C.020 f .010 k dia cable range l max m max v thread class 2b-lh y max free closed 12 10-113138-12 10-113138-13 m85049/2-4c m85049/2-4c .625-24unef .625-24nef .422 .422 .386 .386 1.078 1.125 .750 .750 .688 .688 .302 .094 1.390 1.609 1.375 .625-24nef .625-24nef .906 14 10-113138-14 10-113138-15 m85049/2-6c m85049/2-6c .750-20unef .750-20unef .422 .422 .500 .500 1.078 1.125 .875 .875 .812 .812 .428 .230 1.390 1.609 1.375 .750-20unef .750-20unef 1.031 16 10-113138-16 10-113138-17 m85049/2-8c m85049/2-8c .875-20unef .875-20unef .422 .422 .625 .625 1.078 1.125 1.000 1.000 .938 .938 .515 .316 1.390 1.609 1.375 .875-20unef .875-20unef 1.125 18 10-113138-18 m85049/2-10c 1.000-20unef .422 .752 1.125 1.188 1.062 .614 .378 1.609 1.437 1.000-20unef 1.234 20 10-113138-20 m85049/2-12c 1.1875-18unef .422 .891 1.125 1.312 1.250 .738 .445 1.609 1.437 1.125-18nef 1.484 22 10-113138-22 m85049/2-12c 1.1875-18nef .422 .891 1.125 1.438 1.250 .738 .445 1.609 1.437 1.250-18nef 1.484 24 10-113138-24 m85049/2-16c 1.4375-18unef .422 1.111 1.125 1.562 1.500 .926 .611 1.609 1.562 1.375-18nef 1.671 28 10-113138-28 m85049/2-16c 1.4375-18nef .422 1.111 1.297 1.812 1.500 .926 .611 1.781 1.562 1.625-18nef 1.671 32 10-113138-32 m85049/2-20c 1.750-18uns .484 1.422 1.297 2.062 1.875 1.200 .922 1.781 1.812 1.875-16un 2.188 36 10-113138-36 m85049/2-24c 2.000-18uns .562 1.672 1.297 2.250 2.125 1.363 .922 1.781 2.062 2.0625-16n 2.344 40 10-113138-40 m85049/2-28c 2.250-16un .562 1.914 1.297 2.500 2.375 1.611 1.180 1.781 2.062 2.3125-16n 2.594 44 10-113138-44 m85049/2-32c 2.500-16un .562 2.142 1.297 2.812 2.625 1.865 1.427 1.781 2.188 2.625-16un 2.812 sleeve not supplied as part of ms3057-( )c assembly. order separately by part number shown. shell size sleeve ms part number d dia. .016 z dia free .016 closed 12 ms3420-4a .302 .219 .010 14 ms3420-4a ms3420-6a .302 .427 .219 .312 .020 .114 16 ms3420-6a ms3420-8a .427 .531 .312 .438 .085 .220 18 ms3420-6a ms3420-10a .427 .615 .312 .438 .085 .200 20 ms3420-10a ms3420-12a .615 .740 .438 .541 .177 .270 22 ms3420-10a ms3420-12a .615 .740 .438 .541 .177 .270 24 ms3420-8a ms3420-12a ms3420-16a .531 .740 .927 .438 .541 .750 .186 .260 .433 26 ms3420-8a ms3420-12a ms3420-16a .531 .740 .927 .438 .541 .750 .186 .260 .433 32 ms3420-12a ms3420-16a ms3420-20a .740 .927 1.240 .541 .750 .938 .273 .442 .620 36 ms3420-16a ms3420-20a ms3420-24a .927 1.240 1.365 .750 .938 1.125 .358 .504 .682 40 ms3420-16a ms3420-20a ms3420-28a .927 1.240 1.614 .750 .938 1.250 .368 .514 .816 44 ms3420-20a ms3420-28a ms3420-32a 1.240 1.614 1.865 .938 1.250 1.625 .638 .897 1.229 ms3420-( )a sleeve z d 2.000 .031
57 10-101046-( ), 10-101531-( ) plug protective covers 10-101063-( ), 10-101048-( ) receptacle protective covers qwl C accessories protection caps l f e 10-101046 10-101531 a c b l d e 10-101063 10-101048 a c b
58 qwl C accessories protection caps all dimensions for reference only. *for complete order number see page 5. shell size without eyelet end part number* with eyelet end part number* a thread class 2a b dia +.010 C.000 c approx. e approx. f flat .010 l max. 10 10-101046-10 10-101531-10 .6250-0.05p-0.1l-ds .125 3.000 3.375 .500 1.250 12 10-101046-12 10-101531-12 .7500-0.1p-0.2l-ds .125 3.500 3.875 .625 1.438 14 10-101046-14 10-101531-14 .8750-0.1p-0.2l-ds .125 3.500 3.875 .750 1.438 16 10-101046-16 10-101531-16 1.0000-0.1p-0.2l-ds .140 3.500 3.875 .875 1.438 18 10-101046-18 10-101531-18 1.1250-0.1p-0.2l-ds .140 3.500 4.000 1.000 1.438 20 10-101046-20 10-101531-20 1.2500-0.1p-0.2l-ds .193 4.000 4.500 1.062 1.438 22 10-101046-22 10-101531-22 1.3750-0.1p-0.2l-ds .193 4.000 4.500 1.125 1.438 24 10-101046-24 10-101531-24 1.5000-0.1p-0.2l-ds .193 4.500 5.000 1.250 1.438 28 10-101046-28 10-101531-28 1.7500-0.1p-0.2l-ds .193 4.500 5.000 1.500 1.438 32 10-101046-32 10-101531-32 2.0000-0.1p-0.2l-ds .193 5.000 5.500 1.750 1.438 36 10-101046-36 10-101531-36 2.2500-0.1p-0.2l-ds .193 5.000 5.500 2.000 1.438 40 10-101046-40 10-101531-40 2.5000-0.1p-0.2l-ds .193 5.000 5.500 2.250 1.438 44 10-101046-44 10-101531-44 2.7500-0.1p-0.2l-ds .193 6.000 6.000 2.500 1.438 48 10-101046-48 10-101531-48 3.0000-0.1p-0.2l-ds .193 6.000 6.000 2.750 1.438 all dimensions for reference only. *for complete order number see page 5. shell size without eyelet end part number* with eyelet end part number* a thread class 2b b dia. +.010 C.000 c approx. d dia. max. e approx. l max. 10 10-101063-10 10-101048-10 .6250-0.05p-0.1l-ds .140 3.000 .844 3.375 .750 12 10-101063-12 10-101048-12 .7500-0.1p-0.2l-ds .140 3.500 .969 3.875 .750 14 10-101063-14 10-101048-14 .8750-0.1p-0.2l-ds .140 3.500 1.094 3.875 .750 16 10-101063-16 10-101048-16 1.0000-0.1p-0.2l-ds .140 3.500 1.219 3.875 .750 18 10-101063-18 10-101048-18 1.1250-0.1p-0.2l-ds .193 3.500 1.344 4.000 .969 20 10-101063-20 10-101048-20 1.2500-0.1p-0.2l-ds .193 4.000 1.469 4.500 .969 22 10-101063-22 10-101048-22 1.3750-0.1p-0.2l-ds .193 4.000 1.562 4.500 .969 24 10-101063-24 10-101048-24 1.5000-0.1p-0.2l-ds .193 4.500 1.688 5.000 .969 28 10-101063-28 10-101048-28 1.7500-0.1p-0.2l-ds .193 4.500 1.938 5.000 .969 32 10-101063-32 10-101048-32 2.0000-0.1p-0.2l-ds .193 5.000 2.219 5.500 .969 36 10-101063-36 10-101048-36 2.2500-0.1p-0.2l-ds .193 5.000 2.469 5.500 .969 40 10-101063-40 10-101048-40 2.5000-0.1p-0.2l-ds .193 5.000 2.719 5.500 .969 44 10-101063-44 10-101048-44 2.7500-0.1p-0.2l-ds .193 6.000 2.969 6.000 .969 48 10-101063-48 10-101048-48 3.0000-0.1p-0.2l-ds .193 6.000 3.219 6.000 .969
59 qwl C accessories flange gasket, grip banding clamp all dimensions for reference only. *for complete order number see page 5. part number* part number* shell size f dia. +.016 C.000 r .010 s +.016 C.000 t dia. .010 10-36675-10 10-40450-10 10 .625 .719 1.000 .172 10-36675-12 10-40450-12 12 .750 .813 1.094 .172 10-36675-14 10-40450-14 14 .875 .906 1.188 .172 10-36675-16 10-40450-16 16 1.000 .969 1.281 .172 10-36675-18 10-40450-18 18 1.125 1.063 1.375 .203 10-36675-20 10-40450-20 20 1.250 1.156 1.500 .203 10-36675-22 10-40450-22 22 1.375 1.250 1.625 .203 10-36675-24 10-40450-24 24 1.500 1.375 1.750 .203 10-36675-28 10-40450-28 28 1.750 1.563 2.000 .203 10-36675-32 10-40450-32 32 2.000 1.750 2.250 .219 10-36675-36 10-40450-36 36 2.188 1.938 2.500 .219 10-36675-40 10-40450-40 40 2.438 2.188 2.750 .219 10-36675-44 10-40450-44 44 2.688 2.375 3.000 .219 10-36675-48 10-40450-48 48 2.938 2.625 3.250 .219 all dimensions for reference only. *for complete order number see page 5. part number* a dia. max. min. 10-183249-10 1.125 .812 10-183249-11 1.312 .938 10-183249-12 1.500 1.125 10-183249-13 1.688 1.312 10-183249-14 1.875 1.500 10-183249-15 2.062 1.688 10-183249-16 2.250 1.875 10-183249-17 2.438 2.062 10-183249-18 2.625 2.250 10-183249-19 2.812 2.438 10-183249-20 3.000 2.625 10-36675-( ) 10-40450-( ) flange gaskets 10-183249-( ) grip banding clamp s f t 4 holes r (tp) r (tp) .031 ,010 (10-36675) .031 .005 (10-40450) .375 ref. a
60 qwl crimp contacts machined from copper alloy and silver-plated for maximum corrosion resistance, with a minimum millivolt drop and a maximum current carrying capacity, the size 16 and 12 socket contacts are of the closed entry design. crimp contacts are available for all ms insert arrangements and are identified with an amphenol ? proprietary number. * when using wire adapter sleeve shown. ** contact ratings as stated are test ratings only. the connector could not withstand full rated current through all contacts continuously. please note that the electrical data given is not an establishment of electrical safety factors. this is left entirely in the designers hands as he can best determine which peak voltage, switching surges, transients, etc. can be expected in a particular circuit. ? the 12s, 14s and 16s connectors require short contacts. ms/standard crimp contacts part number pin/ socket mating end size wire barrel size allowable wire size required wire adapter sleeve test current** amps 10-40553 10-40552 or 10-597109-161 pin socket 16 short? 16 16 18 20 22* 10-74696-6 13 10 7.5 5 10-40557 10-40556 or 10-597109-171 pin socket 16 long 16 16 18 20 22* 10-74696-6 13 10 7.5 5 10-40561 10-40560 or 10-597109-131 pin socket 12 12 12 14 23 17 10-40792 10-40793 pin socket 88 8 10* 10-74696-1 46 33 10-40564 10-40565 pin socket 44 4 6* 10-74696-2 80 60 10-40562 or 10-581806 10-40563 or 10-581808 pin socket 00 0 2* 10-74696-7 150 100 * the values listed in table i represent operating values which include a gen- erous safety factor. it may be necessary for some applications to exceed the operating voltages listed here. if this is necessary, designers will find table ii useful for determining the degree to which the recommended val- ues of table i can be exceeded. table i contact arrangement service rating ms service rating recommended operating voltage* at sea level effective creepage distance nom. mechanical spacing nom. dc ac (rms) inst. 250 200 1/16 a 700 500 1/8 1/16 d 1250 900 3/16 1/8 e 1750 1250 1/4 3/16 b 2450 1750 5/16 1/4 c 4200 3000 1 5/16 table ii altitude voltage derating** chart ms service rating nominal distance standard sea level conditions pressure altitude? 50,000 feet pressure altitude? 70,000 feet airspace creepage minimum flashover voltag e ac (rms) test voltag e ac (rms) minimum flashover voltag e ac (rms) test voltag e ac (rms) minimum flashover voltage ac (rms) test voltage ac (rms) inst. 1/32 1/16 1400 1000 500 400 325 260 a 1/16 1/8 2800 2000 800 600 450 360 d 1/8 3/16 3600 2800 900 675 500 400 e 3/16 1/4 4500 3500 1000 750 550 440 b 1/4 5/16 5700 4500 1100 825 600 480 c 5/16 1 8500 7000 1300 975 700 560 ? not corrected for changes in density due to variations in temperature. ** no attempt has been made to recommend operating voltages. the designer must determine his own operating voltage by the application of a safety factor to the above derating chart to compensate for circuit transients, surges, etc.
61 qwl solder contacts machined copper alloy contacts in a full range of sizes, with closed entry socket design in the size 12 and 16 contacts. a heavy silver-plated fin- ish is deposited on all ms style solder contacts for maximum corrosion resistance, maximum current carrying capacity and low millivolt drop. * solder wells filled ** contact ratings as stated are test ratings only. the connector could not with- stand full rated current through all contacts continuously. please note that the electrical data given is not an establishment of electrical safety factors. this is left entirely in the designers hands as he can best determine which peak volt- age, switching surges, transients, etc. can be expected in a particular circuit. ? the 12s, 14s and 16s connectors require short contacts. ms/standard solder contacts* part number pin/ socket mating end size wire barrel size allowable wire size test current** amps 10-40569 10-597107-161 pin socket 16 short? 16 16 18 20 22 13 10 7.5 5 10-40599 10-597107-171 pin socket 16 long 16 16 18 20 22 13 10 7.5 5 10-33646 10-597107-131 pin socket 12 12 12 14 23 17 10-35531 10-35532 pin socket 88 8 10 46 33 10-35529 10-35530 pin socket 44 4 6 80 60 10-35527 10-35528 pin socket 00 0 1 2 150 125 100 * the values listed in table i represent operating values which include a gen- erous safety factor. it may be necessary for some applications to exceed the operating voltages listed here. if this is necessary, designers will find table ii useful for determining the degree to which the recommended val- ues of table i can be exceeded. table i contact arrangement service rating ms service rating recommended operating voltage* at sea level effective creepage distance nom. mechanical spacing nom. dc ac (rms) inst. 250 200 1/16 a 700 500 1/8 1/16 d 1250 900 3/16 1/8 e 1750 1250 1/4 3/16 b 2450 1750 5/16 1/4 c 4200 3000 1 5/16 table ii altitude voltage derating** chart ms service rating nominal distance standard sea level conditions pressure altitude? 50,000 feet pressure altitude? 70,000 feet airspace creepage minimum flashover voltag e ac (rms) test voltag e ac (rms) minimum flashover voltag e ac (rms) test voltage ac (rms) minimum flashover voltage ac (rms) test voltage ac (rms) inst. 1/32 1/16 1400 1000 500 400 325 260 a 1/16 1/8 2800 2000 800 600 450 360 d 1/8 3/16 3600 2800 900 675 500 400 e 3/16 1/4 4500 3500 1000 750 550 440 b 1/4 5/16 5700 4500 1100 825 600 480 c 5/16 1 8500 7000 1300 975 700 560 ? not corrected for changes in density due to variations in temperature. ** no attempt has been made to recommend operating voltages. the designer must determine his own operating voltage by the application of a safety factor to the above derating chart to compensate for cir- cuit transients, surges, etc.
62 qwl application tools (crimp type) complete installation instructions (l-516) for amphenol ? qwl series connectors are available on request. the following data includes information pertaining to the application tools which have been established for crimping, inserting and removing crimp contacts used in qwl series connectors. contact crimping, insertion & removal tools *refer to tool manufacturers for appropriate crimp tools or positioner/turret. ?tools used with arbor press 11-7364. crimping to o l positioner/ turret contact size contact style insertion tool removal tool m22520/1-01 m22520/1-01 * * * * * * * * 16 12 8 4 0 pin & socket pin & socket pin & socket pin & socket pin & socket 11-7345 11-7082 11-8220 11-7365-4? 11-7365-5? 11-8250 kit 11-8250 kit 11-8250 kit pin11-7370-4? socket 11-7674-2? pin 11-7370-5? socket 11-7674-3?
63 qwl thermocouple contacts available from amphenol is a complete line of cylindrical con- nectors featuring thermocouple contact insert arrangements. the design of these contacts is such that standard shell com- ponents and resilient inserts are used in the assemblies. ther- mocouple contacts are available in all arrangements which contain size 12 and 16 pins and sockets, and feature probe- proof, closed entry design for the socket contacts. ms- approved and other commercial arrangements may be ordered with thermocouple contacts substituted for the standard con- tacts. all thermocouple contact layouts may contain either iron, alumel, chromel, constantan, standard (copper) or brass (dummy) contacts. the resulting assembly will be identified with an amphenol ? part number. identification for the purpose of wiring identification, thermocouple contacts are marked in accordance with the following color code which agrees with the wire code. chromel. . . . . . . white alumel . . . . . . . green iron . . . . . . . . black constantan . . . . . yellow this identification is made by means of small dots of stain on solder well end of the contact and is in accordance with the listing shown above. wire well data recommended wire: i chromel C alumel: use wire in accordance with an-w-29 ii iron C constantan: use wire in accordance with an-w-8b contact size 12 16 well inside diameter +.004 C.002 .125 .094 well depth +.031 C.000 .250 .188 solder well barrel outside diameter .166.003 .125 +.002 C.004
64 qwl thermocouple arrangements military connector specifications do not provide for thermo- couple contact usage in established ms inserts. amphe- nol ? has established a series of insert arrangements containing thermocouple contacts. some inserts have been rotated into positions outside those covered by ms drawings to prevent cross plugging. available thermocou- ple arrangements are tabulated on the following pages. please contact your local sales office or sidney, ny for additional information regarding thermocouple arrange- ments particular to your application. the following abbreviations are used in the contact material column: abbreviation ir. con. cu. ch. al. dummy material iron constantan copper chromel alumel brass ?insert arrangements including the letter s are available in qwl series connectors only.*no rotation required. shell size and arrg.? similar to ms arrg. to t a l con- tacts contact size pin insert rotation c/w contact material 12 16 12s-51 12s-3 2 2 315 a = ch.; b = al. 12s-54 12s-3 2 2 315 a = ir.; b = con. 12s-55 12s-3 2 2 45 a = cu.; b = con. 12s-56 12s-3 2 2 none a = al.; b = ch. 12s-57 12s-3 2 2 60 a = ch.; b = al. 12s-58 12s-3 2 2 120 a = ir.; b = con. 12s-59 12s-3 2 2 none a = ir.; b = con. 12s-60 12s-3 2 2 none a = cu.; b = con. 12s-61 12s-3 2 2 none a = ch.; b = con. 12s-62 12s-3 2 2 none a = ch.; b = al. 12s-64 12s-3 2 2 315 a = cu.; b = con. 12s-65 12s-3 2 2 none a = con.; b = ir. 14s-51 14s-9 2 2 90 a = al.; b = ch. 14s-52 14s-2 4 4 45 a, b = cu.; c = al.; d = ch. 14s-53 14s-9 2 2 90 a = ir.; b = con. 14s-54 14s-6 6 6 45 a, c, e = ir.; b, d, f = con. 14s-55 14s-2 4 4 45 a, c = ir.; b, d = con. 14s-56 14s-2 4 4 45 a = ir.; b = con.; c, d = cu. 14s-57 14s-2 4 4 45 a, c = al.; b, d = ch. 14s-58 14s-7 3 3 45 a = al.;b = ch.;c = cu. 14s-59 14s-9 2 2 90 a = cu.; b = con. 14s-60 14s-9 2 2 * a = al.; b = ch. 14s-61 14s-6 6 6 45 a = al.; b = ch.; c = ir.; d = con.; e, f = cu. 14s-63 14s-6 6 6 * a, c = al.; b, d = ch.; e = ir.; f = con. 14s-64 14s-2 4 4 * a, c = con.; b, d = cu. 14s-65 14s-6 6 6 * a, c, e = cu.; b, d, f = con. 14s-67 14s-6 6 6 * a = al.; b = ch.; bal = cu. 14s-68 14s-2 4 4 45 a = ch.; b = con.; c, d = cu. 14s-69 14s-7 3 3 * a = con.; b = ch.; c = cu. 14s-70 14s-2 4 4 * a, d = ch.; b, c = al. 14s-71 14s-2 4 4 * a, b, d = cu.; c = con. 14s-72 14s-9 2 2 * a = con.; b = cu. 14s-73 14s-2 4 4 * a, b = cu.; c = al.; d = ch.
65 qwl thermocouple arrangements (contd.) ?insert arrangements including the letter s are available in qwl series connectors only. *no rotation required. shell size and arrg.? similar to ms arrg. to t a l con- tacts contact size pin insert rotation c/w contact material 12 16 14s-74 14s-2 4 4 * a, b = ch.; c, d = al. 14s-75 14s-2 4 4 * a, b = cu.; c, d = con. 14s-76 14s-2 4 4 * a, c = al.; b, d = ch. 14s-77 14s-2 4 4 * a, d = al.; b, c = ch. 14s-78 14s-9 2 2 * a = ch.; b = al. 14s-79 14s-5 5 5 * a, b, e = cu.; c = al.; d = ch. 14s-80 14s-9 2 2 * a = cu.; b = con. 14s-81 14s-9 2 2 * a = al.; b = cu. 14s-82 14s-2 4 4 * a = ir.; b = con.; c = ch.; d = al. 14s-83 14s-6 6 6 * a, c = ir.; b, d = con.; e, f = cu. 14s-84 14s-6 6 6 * a, b = al.; bal = cu. 14s-85 14s-7 3 3 * a = ch.; b = al.; c = cu. 14s-86 14s-6 6 6 * a, f = ir.; b, e = con.; c, d = cu. 14s-87 14s-6 6 6 * a, b, c, d = ir.; e, f = con. 14s-88 14s-9 2 2 90 a = ch.; b = con. 14s-89 14s-7 3 3 * a = ir.; b = cu., c = con. 14s-90 14s-6 6 6 * a = al.; c = ch.; bal. = cu. 14s-91 14s-2 4 4 * a = al.; b = ch.; bal. = cu. 14s-93 14s-6 6 6 * a, b, f = al.; d, c, e = ch. 14-59 14-53 6 6 * a = al.; b = ch.; c = ir.; d = con.; e, f = cu. 16s-52 16s-4 2 2 * a = ch.; b = al. 16s-54 16s-1 7 7 * a = al.; b = ch.; bal. = cu. 16s-55 16s-1 7 7 * a = con.; bal. = cu. 16s-56 16s-1 7 7 * a = al.; d = ch.; bal. = cu. 16s-57 16s-1 7 7 * a, b = al.; c, d = ch.; bal. = cu. 16s-58 16s-1 7 7 * a, g = al.; bal. = ch. 16s-59 16s-1 7 7 * a, c = ir.; b, d = con.; bal. = cu. 16s-60 16s-1 7 7 * a = ir.; b = con.; bal. = cu. 16s-61 16s-1 7 7 * g = al.; bal. = ch. 16-52 16-11 2 2 90 a = al.; b = ch. 16-53 16-9 4 2 2 70 a = al.; c = ch.; b, d = cu. 16-55 16-10 3 3 45 a = al.; b = ch.; c = cu. 16-56 16-13 2 2 90 a = con.; b = cu. 16-57 16-10 3 3 * a = al.; b = cu.; c = ch. 16-58 16-10 3 3 * a = con.; b, c = cu. 16-60 16-13 2 2 * a = al.; b = ch. 16-62 16-11 2 2 * a = con.; b = cu. 16-67 16-11 2 2 * a = al.; b = ch.; 16-68 16-9 4 2 2 * a, b, c = ch.; d = al. 18-51 18-12 6 6 * a = ir.; b, e = con.; d = cu.; c, f = dummy 18-52 18-11 5 5 * a = ir.; b = con.; c = ch.; d = al.; e = dummy 18-53 18-12 6 6 * a, d = ir.; b, e = con.; c, f = dummy 18-54 18-15 4 4 * a, c = al.; b, d = ch. 18-56 18-1 10 10 45 a, c, e, g, i = ir.; b, d, f, h, j = con. 18-57 18-12 6 6 45 a, c, e = al.; b, d, f = ch. 18-59 18-12 6 6 45 a, c = ir.; b, e, f = con.; d = cu.
66 qwl thermocouple arrangements (contd.) *no rotation required. shell size and arrg.? similar to ms arrg. to t a l con- tacts contact size pin insert rotation c/w contact material 12 16 18-60 18-11 5 5 45 a, d = al.; b, c = ch.; e = al. 18-61 18-12 6 6 * a, c = ir.; b, d = con.; e = ch.; f = al. 18-62 18-12 6 6 * a, b, c = ir.; d, e, f = con. 18-63 18-15 4 4 * a, c = con.; b, d = cu. 18-65 18-12 6 6 * a = ir.; b = con.; bal. = cu. 18-66 18-1 10 10 * a, c, e, g, i = cu.; b, d, f, h, j = con. 18-67 18-12 6 6 * a, c, e = cu.; b, d, f = con. 18-68 18-11 5 5 * a, d = al.; b, c = ch.; e = cu. 18-69 18-1 10 10 * a = al.; b = ch.; bal. = cu. 18-70 18-11 5 5 * a = ir.; b = con.; c = ch.; d = al.; e = cu. 18-71 18-15 4 4 * a = con.; bal. = cu. 18-72 18-15 4 4 * d = con.; bal. = cu. 18-73 18-9 7 2 5 * a = al.; d = ch.; bal. = cu. 18-74 18-12 6 6 * a = ch.; b = al., d = ir.; e = cu.; c, f = con. 18-76 18-1 10 10 * a, c, e, g, i = al.; b, d, f, h, j = ch. 18-77 18-1 10 10 * a, c, e, g = al.; b, d, f, h = ch.; bal. = cu. 18-78 18-1 10 10 * a = al.; b = ch.; d, f, h, j = con.; bal. = cu. 18-79 18-12 6 6 * a, f = ir.; b, e = con.; c, d = cu. 18-80 18-15 4 4 * a, c = cu.; b, d = con. 18-81 18-1 10 10 * e, g = con.; bal. = cu. 18-82 18-1 10 10 * e, g = con.; f, h = ir.; bal. = cu. 20-52 20-4 4 4 315 a = ir.; b = con.; c = ch.; d = al. 20-56 20-7 8 8 45 a, b, g, h = ir.; c, d, e, f = con. 20-60 20-7 8 8 45 d = ch.; e = al.; bal. = cu. 20-61 20-29 17 17 45 a, b, m = cu.; bal. = con. 20-62 20-15 7 7 80 a, c, e = al.; b, d, f = ch.; g = cu. 20-64 20-27 14 14 * a = al.; c = ch.; bal. = cu. 20-65 20-27 14 14 * a, b, c, d, e, f, g = ir.; h, i, j, k, l, m, n = con. 20-67 20-16 9 2 7 * h = al.; i = ch.; bal. = cu. 20-68 20-7 8 8 * a, b, g, h = con.; c, d, e, f = cu. 20-69 20-27 14 14 * a, b, c, d, e, f, g = cu.; h, i, j, k, l, m, n = con. 20-70 20-29 17 17 * a, c, e, g, j, l, n, r, t = ir.; b, d, f, h, k, m, p, s = con. 20-71 20-29 17 17 * s = al.; r = ch.; bal. = cu. 20-74 20-29 17 17 * a, c, e, g, j, l, n, r = ir.; b, d, f, h, k, m, p, s = con.; t = cu. 20-75 20-15 7 7 * g = al.; bal = ch. 20-77 20-16 9 2 7 * a = con.; bal. = std. 20-80 20-27 14 14 * a, c, e, g, i, k, m = cu.; b, d, f, h, j, l, n = con. 20-81 20-27 14 14 * a, c, e, g, i, k, m = ch.; b, d, f, h, j, l, n = al. 20-82 20-29 17 17 * a, c, e, g, j, l, n, r = al.; b, d, f, h, k, m, p, s = ch.; t = cu. 20-85 20-33 11 11 * k, l = al.; bal. = ch. 20-87 20-29 17 17 * a, c, e, g, j, l, n, r = con.; bal. = cu. 20-88 20-27 14 14 * a, c, e = al.; b, d, f = ch.; g, h, k, n = con.; bal. = cu. 20-89 20-27 14 14 * b, d, f, h, j, l = al.; a, c, e, g, i, k = ch.; m, n = cu. 20-90 20-27 14 14 * c, g, i = ch.; k, l, m = al.; bal. = cu. 20-91 20-27 14 14 * i = ch.; k = al.; bal. = cu.
67 qwl thermocouple arrangements (contd.) shell size and arrg. similar to ms arrg. to t a l con- tacts contact size pin insert rotation c/w contact material 12 16 20-92 20-7 8 8 * a = al.; h = cu.; bal. = ch. 20-93 20-27 14 14 * a = ch.; b = al.; bal. = cu. 20-94 20-15 7 7 * a, c, e = al.; b, d, f = ch.; g = cu. 20-99 20-33 11 11 * a = al.; bal. = ch. 22-57 22-14 19 19 45 a, c, e, g, j, l, n, r = ir.; b, d, f, h, k, m, p, s = con.; t, u, v = cu. 22-60 22-14 19 19 45 u = al.; n = ch.; bal. = cu. 22-62 22-23 8 8 60 a, b, f, g = al.; c, d, e, h = ch. 22-68 22-19 14 14 45 a, c, e, g, j, l, m = ir.; b, d, f, h, k, p, n = con. 22-69 22-19 14 14 45 a, c, e, g, j, l, m = cu.; b, d, f, h, k, p, n = con. 22-71 22-14 19 19 * v = al., u = ch.; bal. = cu. 22-72 22-5 6 2 4 * b = al.; e = ch.; bal. = cu. 22-73 22-5 6 2 4 * e = al.; b = ch.; bal. = cu. 22-74 22-23 8 8 * a, c, e, g = ir.; b, d, f, h = con. 22-75 22-23 8 8 * a = al.; b, d, g, h = cu.; c = ch.; e = ir.; f = con. 22-76 21 21 * w = con.; bal. = cu. 22-77 22-19 14 14 * b, d, f, h, j, k, m, p = cu.; a, e, l = ir.; c, g, n = con. 22-78 22-14 19 19 * a, c, e, g, h, k, m, p, r, t = con.; bal. = cu. 22-79 22-10 4 4 * a, c = con.; b, d = cu. 22-82 22-14 19 19 * a, c, e, g, j, l, n, r, t = ir.; b, d, f, h, k, m, p, s, u = con.; v = cu. 22-83 22-18 8 8 * a, c, e, g = al.; b, d, f, h = ch. 22-84 22-14 19 19 * a, c, s = ch.; b, d, t = al.; bal. = cu. 22-85 22-19 14 14 * a, c, e, g, j, l, n = al.; b, d, f, h, k, m, p = ch. 22-89 22-28 7 7 * a, c, e = ir.; b, d, f = con.; g = cu. 24-56 24-20 11 2 9 45 e = al.; f = ch.; bal. = cu. 24-57 24-28 24 24 45 a, c, j, v, y, w, k, e, h, u, s, m = ch.; bal. = al. 24-62 24-28 24 24 * a, c, e, g = ir.; b, d, f, h = con.; r, t = ch.; s, u = al.; bal. = cu. 24-63 24-28 24 24 * a, c, e, g, j, l, k, n, s, u, w, y = cu.; b, d, f, h, q, r, m, p, t, v, x, z = con. 24-64 24-5 16 16 * a, b, c, d, e, f, g, h = ir.; j, k, l, m, n, p, r, s = con. 24-68 24-28 24 24 * d = con.; bal. = cu. 24-81 24-7 16 2 14 * a, c, e, g, i, k, m, n, p = cu.; b, d, f, h, j, l, o = con. 24-88 24-28 24 24 * a, b, c, d, e, f, g, h, j, k, l, m = con.; bal. = ir. 24-91 24-5 16 16 * a, b, c, d, e, f, g, h = al.; j, k, l, m, n, p, r, s = ch. 28-53 28-11 22 4 18 45 j, l = al.; k, m = ch.; bal. = cu. 28-58 28-20 14 10 4 45 a, c, e, g, k, m = al.; b, d, f, h, l, n = ch.; j, p = cu. 28-61 28-21 37 37 45 a, c, j, z, m, r, n, a, k, f, h, x, k, h, t, m, n, d = ir.; bal. = con. 28-63 28-20 14 10 4 45 a, c, e, g, j = al.; b, d, f, h, p = ch.; bal. = cu. 28-64 28-15 35 35 * a, d = al.; b, j = ch.; c, d, e, f, g, n, p, r, s, h, j, k, l, m, w, x, y, z = con.; bal. = cu. 28-65 28-12 26 26 * a, c, e, g, j, l, n, r, t, v = ir.; x, z = al.; b, d, f, h, k, m, p, s, u, w, = con.; y, a = ch.; b, d = cu. 28-67 28-16 20 20 * u = con.; bal. = cu. 28-68 28-15 35 35 45 t = al.; u = ch.; bal. = cu. 28-69 28-11 22 4 18 * g = al.; r = ch.; bal. = cu. 28-70 28-11 22 4 18 * a = al.; b = ch.; bal. = cu. 28-77 28-11 22 4 18 * j = con.; bal. = cu.
68 qwl thermocouple arrangements (contd.) ??amphenol ? arrangement*no rotation required. shell size and arrg. similar to ms arrg. to t a l con- tacts contact size pin insert rotation c/w contact material 12 16 28-81 28-21 37 37 * a, d, s, z, n, s = ir.; b, j, k, f, g, r, = con.; g, l, p, b, e, j = al.; f, h, t, x, h, k = ch.; bal. = cu. 28-85 28-11 22 4 18 45 k, m = al.; j, l = ch.; bal. = cu. 28-91 28-9 12 6 6 * m = ir.; l = con.; bal. = cu. 28-94 28-12 26 26 * b, d, f, h, k, m, p, s, u, w, y, a, d = al.; bal. = ch. 28-98 28-21 37 37 * m = al.; f = ch.; bal. = cu. 28-99 28-12 26 26 * b, d, f, h, k, m, p, s, u, w, y, a = con.; bal. = cu. 28-ac 28-16 20 20 * a, c, e, g, j, l = ir.; b, d, f, n, k, m = con.; bal. = cu. 28-ad 28-21 37 37 45 a, c, f, h, j, k, m, n, t, x, z, a, d, h, k, m, n, r = cu.; bal. = con. 28-ae 28-21 37 37 * a, c, e, g, j, l, n, r, t, v, x, a, c, e, g, j, m, p, s = cu.; bal. = con. 28-af 28-18 12 12 * a, c, e, g, j, l = ch.; bal. = al. 28-ag 28-12 26 26 * a, c, e, g, j, l, n, r = al.; b, d, f, h, k, m, p, s = ch.; bal. = cu. 28-ak 28-21 37 37 * a, b, c, d, j, k, l, m, n, p, x, a, b, c, d, e, m, p = ch.; n = cu.; bal. = al. 32-51 32-8 30 6 24 90 m = ch.; n = al.; bal. = cu. 32-55 32-8 30 6 24 125 m, n, = ch.; o, p = al.; bal. = cu. 32-91 32-64 54 54 * a, c, e, g, j, l, n, p, s, u, w, y, a, c, e, g, j, m = ir.; b, d, f, h, k, m, o, r, t, v, x, z, b, d, f, h, k, n = con.; bal. = cu. 36-53 36-7 47 7 40 45 u, v, w = al.; x, y, z = ch.; bal. = cu. 36-56 36-10 48 48 * a, c, e, g, l, j, h, p, r, t, v, x, z, b, d, f, h, k, q, n, m, u, w, y = con.; bal. = cu. 36-57 36-8 47 1 46 * w = al.; f = ch.; bal. = cu. 36-58 36-15 35 35 * h = al.; g = ch.; bal. = cu. 36-61 36-15 35 35 * a, c, e, j, k, l, m, n, p, r, t, v, f, x, y, h, j, c = con.; bal. = cu. 36-62 36-10 48 48 * a, c, e = al.; b, d, f = ch.; bal. = cu. 36-82 36-52?? 52 52 * v, g = ir.; p, y, c = con.; x = ch.; bal. = cu. 36-86 36-10 48 48 * a, c, e, g, j, l, n, p, r, t, v, x = al.; b, d, f, h, k, m, o, q, s, u, w, y = ch.; z, b, d, f, h, k, n, q, s, u, w, y = con.; a, c, e, g, j, m, p, r, t, v, x, z = cu. 36-88 36-52 52 52 * a, c, e, h, k, m, p, s, u, w, y, a, c, f, h, j, m, p, r, t, v, x, z, ab, ad, af = cu.; bal. = con. 40-58 40-56?? 85 85 * a, c, e, h, k, m, p, s, u, w, y, a, c, f, h, j, m, p, r, t, v, x, z, ab, ad, af, aj, al, an, ap, as, au, aw, ay, ba, bc, be, bh, bk, bm, bp, bs, bu = ir.; bal. = con. 40-59 40-56?? 85 85 * b = ch.; c = con.; bal. = cu. 40-77 40-53?? 60 60 * 55, 60 = ir.; 57, 58, 59 = con.; 56 = ch.; bal. = cu. 40-78 40-53?? 60 60 * 50, 51 = ir.; 27, 28, 29, 31, 32, 34, 36, 37, = con.; 25, 39, 40, 41 = al.; 43, 44, 45, 46, 47, 48, 49, 52, 53, 54 = ch.; bal. = cu. 40-88 40-53 60 60 * 1, 3, 5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43, 45, 47, 49, 51, 53, 55, 57, 59 = con.; bal. = cu. 40-aa 40-56 85 85 * a, c, e, h, k, m, p, s, u, w, y, a, c, f, h, j, m, p, r, t, v, x, z, ab, ad, af, aj, al, an, ar, at = cu.; b, d, f, j, l, n, r, t, v, x, z, b, d, g, i, k, n, q, s, u, w, y, aa, ac, ae, ah, ak, am, ap, as = con.; au, aw, ay, ba, bc, be, bh, bk, bm, bp, bs, bu = ch.; av, ax, az, bb, bd, bf, bj, bl, bn, br, bt, bv = al. 44-57 44-52 104 104 * a, c, e, g, j, l, etc. = cu.; b, d, f, h, k, m, etc. = con. 44-59 44-52 104 104 * 34 = con.; 70 = cu. 44-60 44-52 104 104 * a, c, e, etc. = ch., (52); b, d, f, etc. = al. (52) 44-62 44-52 104 104 * by, bz, ca, cb, cc, cd, ce, cr = al.; ch, cj, ck, cl, cm, cn, cp cs = ch.; bal. = cu.
69 other heavy duty cylindrical connectors offered by amphenol class l mil-c-22992, qwld and star-line amphenol meets the demands for heavy duty connectors by providing three additional cylindrical connector series, each with unique design characteristics for reliable operation in spe- cific industrial environments. class l, mil-c-22992 C for the heaviest electrical loads; for military and industrial applications. ? mil-c-22992 qualification. ? current range from 40 to 200 amperes. ? direct current or single/three phase, 60/400 hertz alternat- ing current. ? rugged shells are resistant to vibration, high impact, shock and corrosion ? double stub threads per mil-std-1373 for fast coupling and easy cleaning. ? five key polarization system assures that circuits with incompatible power characteristics (voltage, phase and frequency) are not mated. ? crimp termination. contacts can be soldered. ? automatic grounding for safety. ? unique arc quenching capability provides a positive safety feature if connectors are inadvertently disconnected under load. ? 4 shell styles with 7 insert patterns that facilitate large conductors. ? grommets and seals provide waterproofing. qwld C for most power and control circuits ? military (mil-c-22992) qualified connectors and industrial equivalents available. ? increased shell size for greater durability than similar standard connectors. ? crimp or solder termination. ? double stub threaded per mil-std-1373. ? 7 shell styles with over 300 insert patterns (mil-c-5015 inserts plus specials) ? class c is pressurized; class r is environmental. star-line ? series C heavy duty environmentally sealed plugs and receptacles that are used in all types of industrial and aerospace applications. ? equals or exceeds mil-c-5015 e and r specifications. ? ul listed and csa listed circuit breaking capability. ? up to high amperage of 1135 amps at 1000vac or dc rating available. ? solder, crimp and pressure terminals. circuit breaking power and control types. ? double lead acme threads provide complete coupling in one turn of the coupling nut, and do not clog under adverse weather conditions. ? ip67 rating for environmental sealing. ? hard anodic coating provides dielectric strength with heat and corrosion resistance. star-line ex ? series C hybrid form of the star-line series with higher temperature ranges. cenelec certified for use in zone 1-iic hazardous environments. ex certificate #03atex 1101x. for further information on these additional heavy duty cylindri- cal connectors, refer to the following: catalog 12-052 for class l, mil-c-22992 connectors catalog 12-052 for qwld connectors catalog 12-054 for star-line and star-line ex connectors. for further information on these additional heavy duty cylindri- cal connectors, refer to the following: catalog 12-052 for class l, mil-c-22992 connectors catalog 12-052 for qwld connectors catalog 12-054 for star-line and star-line ex connectors. heavy duty class l connectors qwld series star-line series

▲Up To Search▲

Price & Availability of 10-69518-11S

	To Download 10-69518-11S Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .